Satoshi – BitcoinWiki

I bought $1000 worth of the Top Ten Cryptos on January 1st, 2018 (Feb 2020 Update)

I bought $1000 worth of the Top Ten Cryptos on January 1st, 2018 (Feb 2020 Update)

2018 \"Index Fund\" EXPERIMENT - Tracking Top 10 Cryptocurrencies of 2018 - Feb 2020/Month Twenty-Six Update - Down 81%
Note: the snapshot was taken on the 1st of March, so does not include the current COVID craziness. Stay tuned for next month's updates to see the result of the current crypto nose dive and how it compares to the current stock market nose dive.
Stay safe, wash your hands, take care of each other.
See the full blog post with all the tables here.

Month Twenty-Six – Down 81%

After a strong start to 2020, February saw a bit of a pullback with nearly every 2018 Top Ten crypto ending in the red. Ethereum is the notable exception, gaining +21% for the month.

Ranking and February Winners and Losers

A mixed month in terms of movement for this group of cryptos. NEM and Stellar made positive moves while Cardano and IOTA, fell two and four positions, respectively. Dash gave up some of the ground it made in January when it jumped an unprecedented 10 slots, but this month it fell from #16 back to #20.
For overall drop out rate, we’re back at the 50% mark: half of the cryptos that started 2018 in the Top Ten have dropped out, specifically NEM, Dash, IOTA, Cardano, and Stellar. They have been replaced by EOS, Binance Coin, Tezos, Tether, and BSV.
February WinnersEthereum easily outperformed the field this month with a +21% gain. NEM finished in second place, up +4%.
February Losers – All the other cryptos ended the month in the red. IOTA picks up the L this month, losing -28% of its value followed closely by Dash which finished down -27%.
For nerds): here is tally of which coins have the most monthly wins and losses in the first 26 months of the 2018 Top Ten Crypto Index Fund Experiment. Most monthly wins (6): Bitcoin. Most monthly losses (5): Stellar. All cryptos have at least one monthly win and Bitcoin now stands alone as the only crypto that hasn’t lost a month (although it came close in January 2020), when it gained “only” +31%).

Overall update – BTC far ahead, ETH takes second place from LTC, IOTA and NEM worst performing

No news here: Bitcoin is still well ahead of the field. Although down -35% since the beginning of 2018, BTC is still returning roughly double of the next crypto down, Ethereum – which, thanks to a strong February, has overtaken Litecoin for second place.
While NEM remains at the bottom, IOTA is dropping quickly. They are down -95% and -94% respectively.

Total Market Cap for the entire cryptocurrency sector:

The overall crypto market lost about $12B in February 2020, a non-event in the crypto world. Since January 2018, the total market cap is down about -57%.

Bitcoin dominance:

Bitcoin dominance ticked down another two points to 64% in February 2020. The last time BitDom was this low was back in July 2019. The range since the beginning of the experiment in January 2018 has been quite wide: a high of 70% in September 2019 and a low of 33% in February 2018.

Overall return on investment since January 1st, 2018:

The 2018 Top Ten Portfolio lost about $16 bucks in February 2020. If I cashed out today, my $1000 initial investment would return about $186, down -81% from January 2018.
Here’s a look at the ROI over the life of the experiment, month by month:
As you can see, nothing but red. The closest the 2018 Top Ten group has come to breaking even was after the very first month, when the portfolio was down -20%. It has been at the at least -80% loss level for the past seven months in a row.
The 2019 Top Ten Experiment and the just launched 2020 Top Ten Experiment are both doing much better:
Taking the three portfolios together, here’s the bottom bottom bottom line:
After a $3000 investment in the 2018, 2019, and 2020 Top Ten Cryptocurrencies, my portfolios are worth $‭3,170‬.
That’s up about +5.6%.

Implications/Observations:

As always, the experiment’s focus of solely holding the Top Ten Cryptos continues to be a losing approach. While the overall market is down -57% from January 2018, the cryptos that began 2018 in the Top Ten are down -81% over the same period. This of course implies that I would have done a bit better if I’d picked different cryptos.
At no point in this experiment has this investment strategy been successful: the initial 2018 Top Ten have under-performed each of the twenty-six months compared to the market overall.
There are a few examples, however, of this approach outperforming the overall market in the parallel 2019 Top Ten Crypto Experiment. And the first two months of the 2020 Experiment show that focusing on the Top Ten is a winning strategy.
I’m also tracking the S&P 500 as part of my experiment to have a comparison point with other popular investments options. After a rough coronavirus fueled week, the S&P 500 has lost a lot of ground. It is currently up only +11% since the beginning of 2018. The initial $1k investment into crypto would have yielded about +$110 had it been redirected to the S&P.
Taking the same drop-$1,000-per-year-on-January-1st approach with the S&P 500 that I’ve been documenting through the Top Ten Crypto Experiments would yield the following:
  • $1000 investment in S&P 500 on January 1st, 2018: +$110
  • $1000 investment in S&P 500 on January 1st, 2019: +$180
  • $1000 investment in S&P 500 on January 1st, 2020: -$90
Taken together, here’s the bottom bottom bottom line for a similar approach with the S&P:
After three $1,000 investments into an S&P 500 index fund in January 2018, 2019, and 2020, my portfolio would be worth $3,200.
That’s up about +6.7% compared to +5.6% with the Top Ten Crypto Experiments.
That’s getting pretty close now, eh? While this month’s update/snapshot is greatly influenced by the coronavirus stock market correction, a difference of only 1% is definitely worth noting.

Conclusion:

Not a great month for crypto, but not a horrible one, especially if you compare to the free fall in the stock market. Depending on how the coronavirus influences both traditional and crypto markets, we could be in for an interesting few months.
Thanks for reading and for supporting the experiment. I hope you’ve found it helpful. I continue to be committed to seeing this process through and reporting along the way. Feel free to reach out with any questions and stay tuned for progress reports. Keep an eye out for my parallel projects where I repeat the experiment twice, purchasing another $1000 ($100 each) of two new sets of Top Ten cryptos as of January 1st, 2019 then again on January 1st, 2020.
submitted by Joe-M-4 to CryptoCurrency [link] [comments]

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?
Overledger is the world’s first blockchain operating system (OS) that not only inter-connects blockchains but also existing enterprise platforms, applications and networks to blockchain and facilitates the creation of internet scale multi-chain applications otherwise known as mApps.
In less than 10 months since launching Overledger they have provided interoperability with the full range of DLT technologies from all the leading Enterprise Permissioned blockchains such as Hyperledger, R3’s Corda, JP Morgan’s Quorum, permissioned variants of Ethereum and Ripple (XRPL) as well as the leading Public Permissionless blockchains / DAGs such as Bitcoin, Stellar, Ethereum, IOTA and EOS as well as the most recent blockchain to get added Binance Chain. In addition, Overledger also connects to Existing Networks / Off Chain / Oracle functionality and it does all of this in a way that is hugely scalable, without imposing restrictions / requiring blockchains to fork their code and can easily integrate into existing applications / networks by just adding 3 lines of code.

https://preview.redd.it/3t3z6hkbxel31.png?width=1920&format=png&auto=webp&s=ac989c2752c726e10d2291eb271721ceaa332a30

What is a blockchain Operating system?

You will be familiar with Operating systems such as Microsoft Windows, Apple Mac OS, Google’s Android etc but these are all Hardware based Operating Systems. Hardware based Operating Systems provide a platform to build and use applications that abstracts all of the complexities involved with integrating with all the hardware resources such as CPU, Memory, Storage, Mouse, Keyboard, Video etc so software can easily integrate with it. It provides interoperability between the Hardware devices and Software.
Overledger is a Blockchain Operating System, it provides a platform to build and use applications that abstracts all of the complexities involved with integrating with all the different blockchains, different OP_Codes being used, messaging formats etc as well as connecting to existing non-blockchain networks. It provides interoperability between Blockchains, Existing Networks and Software / MAPPs

How is Overledger different to other interoperability projects?

Other projects are trying to achieve interoperability by adding another blockchain on top of existing blockchains. This adds a lot of overhead, complexity, and technical risk. There are a few variants but essentially they either need to create custom connectors for each connected blockchain and / or require connected chains to fork their code to enable interoperability. An example of the process can be seen below:
User sends transaction to a multi sig contract on Blockchain A, wait for consensus to be reached on Blockchain A
A custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the smart contract on Blockchain A. Once they see the transaction, they then sign a transaction on the Interoperability blockchain as proof the event has happened on Blockchain A.
Wait for consensus to be reached on the Interoperability Blockchain.
The DAPP running on the Interoperability Blockchain is then updated with the info about the transaction occurring on Blockchain A and then signs a transaction on the Interoperability blockchain to a multi sig contract on the Interoperability Blockchain.
Wait for consensus to be reached on the interoperability Blockchain.
A different custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the Smart Contract on the Interoperability Blockchain which are destined for Blockchain B. Once they see the transaction, they sign a transaction on Blockchain B. Wait for consensus to be reached on Blockchain B.

https://preview.redd.it/xew1eu1exel31.png?width=1558&format=png&auto=webp&s=df960ded46d40fc9bf0ae8b54ff3b3b86276708a
Other solutions require every connecting blockchain to fork their code and implement their Interoperability protocol. This means the same type of connector can be used instead of a custom one for every blockchain however every connected blockchain has to fork their code to implement the protocol. This enforces a lot of restrictions on what the connected blockchains can implement going forward.

https://preview.redd.it/pe166qyexel31.png?width=1561&format=png&auto=webp&s=d4c982089276e64cd909537c9ce744b59e168b6d
Some problems with these methods:
  • They add a lot of Overhead / Latency. Rather than just having the consensus of Blockchain A and B, you add the consensus mechanism of the Interoperability Blockchain as well.
  • Decentralisation / transaction security is reduced. If Blockchain A and Blockchain B each have 1,000 nodes validating transactions, yet the Interoperability Blockchain only has 100 nodes then you have reduced the security of the transaction from being validated by 1000 to validated by 100.
  • Security of the Interoperability Blockchain must be greater than the sum of all transactions going through it. JP Morgan transfer $6 Trillion every day, if they move that onto blockchain and need interoperability between two Permissioned blockchains that have to connect via a public Interoperability blockchain, then it would always have to be more costly to attack the blockchain than the value from stealing the funds transacted through the blockchain.
  • Imposes a lot of limitations on connected blockchains to fork their code which may mean they have to drop some existing functionality as well as prevent them from adding certain features in the future.
  • Creates a single point of failure — If the Interoperability blockchain or connector has an issue then this affects each connected blockchain.
  • It doesn’t scale and acts as a bottleneck. Not only does building complex custom connectors not scale but the Interoperability blockchain that they are forcing all transactions to go through has to be faster than the combined throughput of connected blockchains. These Interoperability blockchains have limited tps, with the most being around 200 and is a trade off between performance and decentralisation.

But some Interoperability blockchains say they are infinitely scalable?

If the interoperability blockchain is limited to say 200 tps then the idea is to just have multiple instances of the blockchain and run them in parallel, so you benefit from the aggregated tps, but just how feasible is that? Lets say you want to connect Corda (capable of 2000+ tps) to Hyperledger (capable of up to 20,000 tps with recent upgrade). (Permissioned blockchains such as Hyperledger and Corda aren’t one big blockchain like say Bitcoin or Ethereum, they have separate instances for each consortium and each is capable of those speeds). So even when you have just 1 DAPP from one consortium that wants to connect Corda to Hyperledger and use 2000 tps for their DAPP, you would need 100 instances of the Interoperability blockchain, each with their own validators (which maybe 100–200 nodes each). So, 1 DAPP would need to cover the costs for 100 instances of the blockchain and running costs for 10,000 nodes…This is just one DAPP connected to one instance of a two permissioned blockchains, which are still in the early stages. Other blockchains such as Red Belly Blockchain can achieve 440,000 tps, and this will surely increase as the technology matures. There is also the added complexity of then aggregating the results / co-coordinating between the different instances of the blockchain. Then there are the environmental concerns, the power required for all of these instances / nodes is not sustainable.

https://preview.redd.it/yz2wvnhgxel31.png?width=1070&format=png&auto=webp&s=e6cb66e362b18e9924245a6a99e0eac4c9083308
It’s not just transactions per second of the blockchain as well, its the latency of all these added consensuses along the path to reach to the destination and not knowing whether the security of each of the hops is sufficient and can be trusted. To see examples of how this potential issue as well as others effect Cosmos you can see my article here. I recommend also reading a blog done by the CEO of Quant, Gilbert Verdian, which explains how Overledger differs here as well as detailed in the whitepaper here.

https://preview.redd.it/2cwj4k7hxel31.png?width=1169&format=png&auto=webp&s=d6fc49086f944089cef7ffa1dfc9d284107ad2e3

Overledger’s approach

In 1973 Vint Cerf invented the protocol that rules them all: TCP/IP. Most people have never heard of it. But it describes the fundamental architecture of the internet, and it made possible Wi-Fi, Ethernet, LANs, the World Wide Web, e-mail, FTP, 3G/4G — as well as all of the inventions built upon those inventions.
Wired: So from the beginning, people, including yourself, had a vision of where the internet was going to go. Are you surprised, though, that at this point the IP protocol seems to beat almost anything it comes up against?Cerf: I’m not surprised at all because we designed it to do that.This was very conscious. Something we did right at the very beginning, when we were writing the specifications, we wanted to make this a future-proof protocol. And so the tactic that we used to achieve that was to say that the protocol did not know how — the packets of the internet protocol layer didn’t know how they were being carried. And they didn’t care whether it was a satellite link or mobile radio link or an optical fiber or something else.We were very, very careful to isolate that protocol layer from any detailed knowledge of how it was being carried. Plainly, the software had to know how to inject it into a radio link, or inject it into an optical fiber, or inject it into a satellite connection. But the basic protocol didn’t know how that worked.And the other thing that we did was to make sure that the network didn’t know what the packets had in them. We didn’t encrypt them to prevent it from knowing — we just didn’t make it have to know anything. It’s just a bag of bits as far as the net was concerned.We were very successful in these two design features, because every time a new kind of communications technology came along, like frame relay or asynchronous transfer mode or passive optical networking or mobile radio‚ all of these different ways of communicating could carry internet packets.We would hear people saying, ‘The internet will be replaced by X25,’ or ‘The internet will be replaced by frame relay,’ or ‘The internet will be replaced by APM,’ or ‘The internet will be replaced by add-and-drop multiplexers.’Of course, the answer is, ‘No, it won’t.’ It just runs on top of everything. And that was by design. I’m actually very proud of the fact that we thought of that and carefully designed that capability into the system.
This is the approach Quant have taken with their Blockchain OS, Overledger to solve Blockchain interoperability. Compared to other Interoperability platforms that are trying to achieve interoperability at the transaction layer by connecting two blockchains via another blockchain, these will be ultimately be made redundant once faster methods are released. Overledger is designed to be future proof by isolating the layers so it doesn’t matter whether it’s a permissioned blockchain, permissionless, DAG, Legacy network, POW, POS etc because it abstracts the transaction layer from the messaging layer and runs on top of blockchains. Just as the Internet wasn’t replaced by X25, frame relay, APM etc, Overledger is designed to be future proof as it just runs on top of the Blockchains rather than being a blockchain itself. So, if a new blockchain technology comes out that is capable of 100,000 TPS then it can easily be integrated as Overledger just runs on top of it.
Likewise, with protocols such as HTTPS, SSH etc these will also emerge for blockchains such as ZK-Snarks and other privacy implementations as well as other features made available, all will be compatible with Overledger as its just sitting on top rather than forcing their own implementation for all.
It doesn’t require blockchains to fork their code to make it compatible, it doesn’t add the overhead of adding another blockchain with another consensus mechanism (most likely multiple as it has to go through many hops). All of this adds a lot of latency and restrictions which isn’t needed. The developer can just choose which blockchains they want to connect and use the consensus mechanisms of those blockchains rather than forced to use one.
Overledger can provide truly internet scale to meet whatever the demands may be, whether that be connecting multiple red belly blockchains together with 440,000 tps it doesn’t matter as it doesn’t add its consensus mechanism and uses proven internet scale technology such as that based on Kubernetes, which is where each task is split up into a self-contained container and each task is scaled out by deploying more to meet demand. Kubernetes is what runs Google Search engine where they scale up and down billions of containers every week.
Due to this being more of a summary, I strongly recommend you read this article which goes into detail about the different layers in Overledger.

https://preview.redd.it/1lpt98cixel31.png?width=1126&format=png&auto=webp&s=3928cf66cfe25bfce7dc84be7b6db670ac952ccf

But how does it provide the security of a blockchain if it doesn’t add its own blockchain?

This is often misunderstood by people. Overledger is not a blockchain however it still uses a blockchain for security, immutability, traceability etc, just rather than force people to use their own blockchain, it utilises the source and destination blockchains instead. The key thing to understand is the use of its patented technology TrustTag, which was made freely available to anyone with the Overledger SDK.
Please see this article which explains TrustTag in detail with examples showing how hashing / digital signatures work etc
A quick overview is if i want to send data from one blockchain to another the Overledger SDK using Trusttag will put the data through a hashing algorithm. The Hash is then included in digital signature as part of the transaction which is signed by the user’s private key and then validated through normal consensus and stored as metadata on the source blockchain. The message is then sent to the MAPP off chain. The MAPP periodically scans the blockchains and puts the received message through a hashing algorithm and compares the Hash to the one stored as metadata on the blockchain. This ensures that the message hasn’t been modified in transit, the message is encrypted and only the Hash is stored on chain so completely private, provides immutability as it was signed by the user’s private key which only they have and is stored on the blockchain for high availability and secure so that it can’t be modified, with the ability to refer back to it at any point in time.
Despite Overledger being a very secure platform, with the team having a very strong security background such as Gilbert who was chief security information officer for Vocalink (Bank of England) managing £6 trillion of payments every year and classified as national critical security (highest level you can get), ultimately you don’t need to trust Overledger. Transactions are signed and encrypted at client side, so Overledger has no way of being able to see the contents. It can’t modify any transaction as the digital signature which includes a hash of the transaction would be different so would get rejected. Transaction security isn’t reduced as it is signed at source using however many nodes the source blockchain has rather than a smaller amount of nodes with an interoperability blockchain in the middle.

Patents

The core code of Overledger is closed source and patented, one of the recent patents can be seen here, along with TrustTag and further ones are being filed. The Overledger SDK is open source and is available in Java and Javascript currently, with plans to support Pyhton and Ruby in the near future. Java and Javascript are the most popular programming languages used today.
The Blockchain connectors are also open source and this allows the community to create connectors to connect their favourite blockchain so that it can benefit from blockchain interoperability and making it available to all enterprises / developers currently utilising Overledger. Creating is currently taking around a week to implement and so far, have been added based upon client demand.

Multi Chain Applications (MAPPs)

Multi Chain Applications (MAPPs) enable an application to use multiple blockchains and interoperate between them. Treaty Contracts enable a developer to build a MAPP and then change the underlying blockchain it uses with just a quick change of couple of lines of code. This is vital for enterprises as it’s still early days in Blockchian and we don’t know which are going to be the best blockchain in the future. Overledger easily integrates into existing applications using the Overledger SDK by just adding 3 lines of code. They don’t need to completely rewrite the application like you do with the majority of other projects and all existing java / javascript apps on Windows / Mobile app stores / business applications etc can easily integrate with overledger with minimal changes in just 8 minutes.

Treaty Contracts

What Overledger will allow with Treaty contracts is to use popular programming languages such as Java and create a smart contract in Overledger that interacts with all of the connected blockchains. Even providing Smart contract functionality to blockchains that don’t support them such as Bitcoin. This means that developers don’t have to create all the smart contracts on each blockchain in all the different programming languages but instead just create them in Overledger using languages such as Java that are widely used today. If they need to use a different blockchain then it can be as easy as changing a line of code rather than having to completely rewrite the smart contracts.
Overledger isn’t a blockchain though, so how can it trusted with the smart contract? A Hash of the smart contract is published on any blockchain the MAPP developer requires and when called the smart contract is run its run through a hashing function to check that it matches the Hash value stored on the blockchain, ensuring that it has not been modified.
By running the Smart contract off chain this also increases Scalability enormously. With a blockchain all nodes have to run the smart contract one after another rather than in parallel. Not only do you get the performance benefit of not having to run the code against every single node but you can also run them in parallel to others executing smart contracts.
You can read more about Treaty Contracts here

The different versions of Overledger

Enterprise version

The current live version is the Enterprise version as that is where most of the adoption is taking place in blockchain due to permissioned blockchains being preferred until permissionless blockchains resolve the scalability, privacy and regulatory issues. Please see this article which goes into more details about Entereprise blockchain / adoption. The Enterprise version connects to permissioned blockchains as well as additional features / support suited for Enterprises.

Community version

The community version is due to be released later this year which will allow developers to benefit from creating MAPPs across permissionless blockchains. Developers can publish their MAPPs on the MAPP Store to create additional revenue streams for developers.

Where does Overledger run from? Is it Centralised?

Overledger can run from anywhere. The community version will have instances across multiple public clouds, Enterprises / developers may prefer to host the infrastructure themselves within a consortium which they can and are doing. For example SIA is the leading private Financial Network provider in Europe, it provides a dedicated high speed network which connects all the major banks, central banks, trading venues etc. SIA host Overledger within their private network so that all of those clients can access it in the confinement of their heavily regulated, secure, fast network. AUCloud / UKCLoud host Overledger in their environment to offer as a service to their clients which consist of Governments and critical national infrastructure.
For Blockchain nodes that interact with Overledger the choice is entirely up to the developer. Each member within a consortium may choose to host a node, some developers may prefer to use 3rd party hosting providers such as Infura, or Quant can also host them if they prefer, its entirely their choice.
Overledger allows for higher levels of decentralisation by storing the output across multiple blockchains so you not only benefit from the decentralisation of one blockchain but the combination of all of them. Ultimately though decentralisation is thrown around too much without many actually understanding what it means. It’s impossible to have complete decentralisation, when you sign a transaction to be added to a blockchain ultimately you still connect through a single ISP, connect through a single router, or the input into a transaction is done through a piece of software etc. What matters to be decentralised is where trust is involved. As i have mentioned before you don’t need to trust the OS, it’s just providing instructions on how to interact with the blockchains, the end user is signing the transactions / encrypting at client side. Nothing can be seen or modified with the OS. Even if somehow the transaction did get modified then it would get rejected when consensus is done as the hash / digital signature won’t match at the destination blockchain. Where the transaction actually gets put onto the blockchain is where decentralisation matters, because thats what needs to be trusted and conensus is reached and Overledger enables this to be written across multiple blockchains at the same time.

The Team

The team are very well connected with a wealth of experience at very senior roles at Global enterprises which I will include a few examples below. Gilbert Verdian the CEO was the Head of security for the payment infrastructure for the Bank of England through his CISO role with Vocalink (Mastercard)managing £6 trillion every year. This is treated by the government as critical national infrastructure which is the highest level of criticallity because its so fundamental to the security of the country. They have experience and know what it takes to run a secure financial infrastructure and meeting requirements of regulators. Gilbert was director for Cybersecurity at PWC, Security for HSBC and Ernst & Young as well as various government roles such as the CISO for the Australian NSW Health, Head of Security at the UK government for Ministry of Justice and HM Treasury in addition to being part of the committee for the European Commission, US Federal Reserve and the Bank of England.
Cecilia Harvey is the Chief Operating Officer, where she was previously a Director at HSBC in Global Banking and Markets and before that Director at Vocalink. Cecilia was also Chief Operating Officer at Citi for Markets and Securities Services Technology as well as working for Barclays, Accenture, IBM and Morgan Stanley.
Vijay Verma is the Overledger platform lead with over 15 years of developer experience in latest technologies like Java, Scala, Blockchain & enterprise technology solutions. Over the course of his career, he has worked for a number of prestigious organisations including J&J, Deutsche, HSBC, BNP Paribas, UBS Banks, HMRC and Network Rail.
Guy Dietrich, the managing director of Rockefeller Capital (manages $19 Billion in assets) has joined the board of Quant Network, and has recently personally attended meetings with the Financial Conduct Authority (FCA) with Gilbert

https://preview.redd.it/1x25xg78efl31.png?width=566&format=png&auto=webp&s=abea981ff40355eed2d0e3be1ca414c5b1b8573c
As well as advisors such as Paolo Tasca, the founder and Executive Director of the Centre for Blockchain Technologies (UCL CBT) at University College Londonfounder and executive director as well as Chris Adelsbach, Managing Director at Techstars, the worldwide network that helps entrepreneurs succeed. Techstars has partners such as Amazon, Barclays, Boeing, Ford, Google, Honda, IBM, Microsoft, PWC, Sony, Target, Total, Verizon, Western Union etc.
Due to client demand they are expanding to the US to setup a similar size office where board members such as Guy Dietrich will be extremely valuable in assisting with the expansion.
https://twitter.com/gverdian/status/1151549142235340800
The most exciting part about the project though is just how much adoption there has been of the platform, from huge global enterprises, governments and cloud providers they are on track for a revenue of $10 million in their first year. I will go through these in the next article, followed by further article explaining how the Token and Treasury works.
You can also find out more info about Quant at the following:
Part One — Blockchain Fundamentals
Part Two — The Layers Of Overledger
Part Three — TrustTag and the Tokenisation of data
Part Four — Features Overledger provides to MAPPs
Part Five — Creating the Standards for Interoperability
Part Six — The Team behind Overledger and Partners
Part Seven — The QNT Token
Part Eight — Enabling Enterprise Mass Adoption
Quant Network Enabling Mass Adoption of Blockchain at a Rapid Pace
Quant Network Partner with SIA, A Game Changer for Mass Blockchain Adoption by Financial Institutions
submitted by xSeq22x to QuantNetwork [link] [comments]

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?
Overledger is the world’s first blockchain operating system (OS) that not only inter-connects blockchains but also existing enterprise platforms, applications and networks to blockchain and facilitates the creation of internet scale multi-chain applications otherwise known as mApps.
In less than 10 months since launching Overledger they have provided interoperability with the full range of DLT technologies from all the leading Enterprise Permissioned blockchains such as Hyperledger, R3’s Corda, JP Morgan’s Quorum, permissioned variants of Ethereum and Ripple (XRPL) as well as the leading Public Permissionless blockchains / DAGs such as Bitcoin, Stellar, Ethereum, IOTA and EOS as well as the most recent blockchain to get added Binance Chain. In addition, Overledger also connects to Existing Networks / Off Chain / Oracle functionality and it does all of this in a way that is hugely scalable, without imposing restrictions / requiring blockchains to fork their code and can easily integrate into existing applications / networks by just adding 3 lines of code.

https://preview.redd.it/30jclqe3wel31.png?width=1920&format=png&auto=webp&s=2bcce5d296c3a287dccdd28b72877ca9e03a5f31

What is a blockchain Operating system?

You will be familiar with Operating systems such as Microsoft Windows, Apple Mac OS, Google’s Android etc but these are all Hardware based Operating Systems. Hardware based Operating Systems provide a platform to build and use applications that abstracts all of the complexities involved with integrating with all the hardware resources such as CPU, Memory, Storage, Mouse, Keyboard, Video etc so software can easily integrate with it. It provides interoperability between the Hardware devices and Software.
Overledger is a Blockchain Operating System, it provides a platform to build and use applications that abstracts all of the complexities involved with integrating with all the different blockchains, different OP_Codes being used, messaging formats etc as well as connecting to existing non-blockchain networks. It provides interoperability between Blockchains, Existing Networks and Software / MAPPs

How is Overledger different to other interoperability projects?

Other projects are trying to achieve interoperability by adding another blockchain on top of existing blockchains. This adds a lot of overhead, complexity, and technical risk. There are a few variants but essentially they either need to create custom connectors for each connected blockchain and / or require connected chains to fork their code to enable interoperability. An example of the process can be seen below:
User sends transaction to a multi sig contract on Blockchain A, wait for consensus to be reached on Blockchain A
A custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the smart contract on Blockchain A. Once they see the transaction, they then sign a transaction on the Interoperability blockchain as proof the event has happened on Blockchain A.
Wait for consensus to be reached on the Interoperability Blockchain.
The DAPP running on the Interoperability Blockchain is then updated with the info about the transaction occurring on Blockchain A and then signs a transaction on the Interoperability blockchain to a multi sig contract on the Interoperability Blockchain.
Wait for consensus to be reached on the interoperability Blockchain.
A different custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the Smart Contract on the Interoperability Blockchain which are destined for Blockchain B. Once they see the transaction, they sign a transaction on Blockchain B. Wait for consensus to be reached on Blockchain B.
https://preview.redd.it/2apm3pb5wel31.png?width=1558&format=png&auto=webp&s=7027514706d7b12690b1be8f4f4af7cfc9c43354
Other solutions require every connecting blockchain to fork their code and implement their Interoperability protocol. This means the same type of connector can be used instead of a custom one for every blockchain however every connected blockchain has to fork their code to implement the protocol. This enforces a lot of restrictions on what the connected blockchains can implement going forward.

https://preview.redd.it/4axzxx57wel31.png?width=1561&format=png&auto=webp&s=a8c3de8468ef9b67bc1db75cffbef81ef8c0aa70
Some problems with these methods:
  • They add a lot of Overhead / Latency. Rather than just having the consensus of Blockchain A and B, you add the consensus mechanism of the Interoperability Blockchain as well.
  • Decentralisation / transaction security is reduced. If Blockchain A and Blockchain B each have 1,000 nodes validating transactions, yet the Interoperability Blockchain only has 100 nodes then you have reduced the security of the transaction from being validated by 1000 to validated by 100.
  • Security of the Interoperability Blockchain must be greater than the sum of all transactions going through it. JP Morgan transfer $6 Trillion every day, if they move that onto blockchain and need interoperability between two Permissioned blockchains that have to connect via a public Interoperability blockchain, then it would always have to be more costly to attack the blockchain than the value from stealing the funds transacted through the blockchain.
  • Imposes a lot of limitations on connected blockchains to fork their code which may mean they have to drop some existing functionality as well as prevent them from adding certain features in the future.
  • Creates a single point of failure — If the Interoperability blockchain or connector has an issue then this affects each connected blockchain.
  • It doesn’t scale and acts as a bottleneck. Not only does building complex custom connectors not scale but the Interoperability blockchain that they are forcing all transactions to go through has to be faster than the combined throughput of connected blockchains. These Interoperability blockchains have limited tps, with the most being around 200 and is a trade off between performance and decentralisation.

But some Interoperability blockchains say they are infinitely scalable?

If the interoperability blockchain is limited to say 200 tps then the idea is to just have multiple instances of the blockchain and run them in parallel, so you benefit from the aggregated tps, but just how feasible is that? Lets say you want to connect Corda (capable of 2000+ tps) to Hyperledger (capable of up to 20,000 tps with recent upgrade). (Permissioned blockchains such as Hyperledger and Corda aren’t one big blockchain like say Bitcoin or Ethereum, they have separate instances for each consortium and each is capable of those speeds). So even when you have just 1 DAPP from one consortium that wants to connect Corda to Hyperledger and use 2000 tps for their DAPP, you would need 100 instances of the Interoperability blockchain, each with their own validators (which maybe 100–200 nodes each). So, 1 DAPP would need to cover the costs for 100 instances of the blockchain and running costs for 10,000 nodes…This is just one DAPP connected to one instance of a two permissioned blockchains, which are still in the early stages. Other blockchains such as Red Belly Blockchain can achieve 440,000 tps, and this will surely increase as the technology matures. There is also the added complexity of then aggregating the results / co-coordinating between the different instances of the blockchain. Then there are the environmental concerns, the power required for all of these instances / nodes is not sustainable.

https://preview.redd.it/myjx8t29wel31.png?width=1070&format=png&auto=webp&s=550ac862c3c5b46df8ed42cf37282cad0a960819
It’s not just transactions per second of the blockchain as well, its the latency of all these added consensuses along the path to reach to the destination and not knowing whether the security of each of the hops is sufficient and can be trusted. To see examples of how this potential issue as well as others effect Cosmos you can see my article here. I recommend also reading a blog done by the CEO of Quant, Gilbert Verdian, which explains how Overledger differs here as well as detailed in the whitepaper here.

https://preview.redd.it/m9036lzfwel31.png?width=1169&format=png&auto=webp&s=50e54198a97106b3921f79ca928f7e808a5529d7

Overledger’s approach

In 1973 Vint Cerf invented the protocol that rules them all: TCP/IP. Most people have never heard of it. But it describes the fundamental architecture of the internet, and it made possible Wi-Fi, Ethernet, LANs, the World Wide Web, e-mail, FTP, 3G/4G — as well as all of the inventions built upon those inventions.
***Wired: So from the beginning, people, including yourself, had a vision of where the internet was going to go. Are you surprised, though, that at this point the IP protocol seems to beat almost anything it comes up against?***Cerf: I’m not surprised at all because we designed it to do that.This was very conscious. Something we did right at the very beginning, when we were writing the specifications, we wanted to make this a future-proof protocol. And so the tactic that we used to achieve that was to say that the protocol did not know how — the packets of the internet protocol layer didn’t know how they were being carried. And they didn’t care whether it was a satellite link or mobile radio link or an optical fiber or something else.We were very, very careful to isolate that protocol layer from any detailed knowledge of how it was being carried. Plainly, the software had to know how to inject it into a radio link, or inject it into an optical fiber, or inject it into a satellite connection. But the basic protocol didn’t know how that worked.And the other thing that we did was to make sure that the network didn’t know what the packets had in them. We didn’t encrypt them to prevent it from knowing — we just didn’t make it have to know anything. It’s just a bag of bits as far as the net was concerned.We were very successful in these two design features, because every time a new kind of communications technology came along, like frame relay or asynchronous transfer mode or passive optical networking or mobile radio‚ all of these different ways of communicating could carry internet packets.We would hear people saying, ‘The internet will be replaced by X25,’ or ‘The internet will be replaced by frame relay,’ or ‘The internet will be replaced by APM,’ or ‘The internet will be replaced by add-and-drop multiplexers.’Of course, the answer is, ‘No, it won’t.’ It just runs on top of everything. And that was by design. I’m actually very proud of the fact that we thought of that and carefully designed that capability into the system.
This is the approach Quant have taken with their Blockchain OS, Overledger to solve Blockchain interoperability. Compared to other Interoperability platforms that are trying to achieve interoperability at the transaction layer by connecting two blockchains via another blockchain, these will be ultimately be made redundant once faster methods are released. Overledger is designed to be future proof by isolating the layers so it doesn’t matter whether it’s a permissioned blockchain, permissionless, DAG, Legacy network, POW, POS etc because it abstracts the transaction layer from the messaging layer and runs on top of blockchains. Just as the Internet wasn’t replaced by X25, frame relay, APM etc, Overledger is designed to be future proof as it just runs on top of the Blockchains rather than being a blockchain itself. So, if a new blockchain technology comes out that is capable of 100,000 TPS then it can easily be integrated as Overledger just runs on top of it.
Likewise, with protocols such as HTTPS, SSH etc these will also emerge for blockchains such as ZK-Snarks and other privacy implementations as well as other features made available, all will be compatible with Overledger as its just sitting on top rather than forcing their own implementation for all.
It doesn’t require blockchains to fork their code to make it compatible, it doesn’t add the overhead of adding another blockchain with another consensus mechanism (most likely multiple as it has to go through many hops). All of this adds a lot of latency and restrictions which isn’t needed. The developer can just choose which blockchains they want to connect and use the consensus mechanisms of those blockchains rather than forced to use one.
Overledger can provide truly internet scale to meet whatever the demands may be, whether that be connecting multiple red belly blockchains together with 440,000 tps it doesn’t matter as it doesn’t add its consensus mechanism and uses proven internet scale technology such as that based on Kubernetes, which is where each task is split up into a self-contained container and each task is scaled out by deploying more to meet demand. Kubernetes is what runs Google Search engine where they scale up and down billions of containers every week.
Due to this being more of a summary, I strongly recommend you read this article which goes into detail about the different layers in Overledger.

https://preview.redd.it/6x7tjq9jwel31.png?width=1126&format=png&auto=webp&s=52ac5b9ebb45908ef6070d2eed6d107d380da1df

But how does it provide the security of a blockchain if it doesn’t add its own blockchain?

This is often misunderstood by people. Overledger is not a blockchain however it still uses a blockchain for security, immutability, traceability etc, just rather than force people to use their own blockchain, it utilises the source and destination blockchains instead. The key thing to understand is the use of its patented technology TrustTag, which was made freely available to anyone with the Overledger SDK.
Please see this article which explains TrustTag in detail with examples showing how hashing / digital signatures work etc
A quick overview is if i want to send data from one blockchain to another the Overledger SDK using Trusttag will put the data through a hashing algorithm. The Hash is then included in digital signature as part of the transaction which is signed by the user’s private key and then validated through normal consensus and stored as metadata on the source blockchain. The message is then sent to the MAPP off chain. The MAPP periodically scans the blockchains and puts the received message through a hashing algorithm and compares the Hash to the one stored as metadata on the blockchain. This ensures that the message hasn’t been modified in transit, the message is encrypted and only the Hash is stored on chain so completely private, provides immutability as it was signed by the user’s private key which only they have and is stored on the blockchain for high availability and secure so that it can’t be modified, with the ability to refer back to it at any point in time.
Despite Overledger being a very secure platform, with the team having a very strong security background such as Gilbert who was chief security information officer for Vocalink (Bank of England) managing £6 trillion of payments every year and classified as national critical security (highest level you can get), ultimately you don’t need to trust Overledger. Transactions are signed and encrypted at client side, so Overledger has no way of being able to see the contents. It can’t modify any transaction as the digital signature which includes a hash of the transaction would be different so would get rejected. Transaction security isn’t reduced as it is signed at source using however many nodes the source blockchain has rather than a smaller amount of nodes with an interoperability blockchain in the middle.

Patents

The core code of Overledger is closed source and patented, one of the recent patents can be seen here, along with TrustTag and further ones are being filed. The Overledger SDK is open source and is available in Java and Javascript currently, with plans to support Pyhton and Ruby in the near future. Java and Javascript are the most popular programming languages used today.
The Blockchain connectors are also open source and this allows the community to create connectors to connect their favourite blockchain so that it can benefit from blockchain interoperability and making it available to all enterprises / developers currently utilising Overledger. Creating is currently taking around a week to implement and so far, have been added based upon client demand.

Multi Chain Applications (MAPPs)

Multi Chain Applications (MAPPs) enable an application to use multiple blockchains and interoperate between them. Treaty Contracts enable a developer to build a MAPP and then change the underlying blockchain it uses with just a quick change of couple of lines of code. This is vital for enterprises as it’s still early days in Blockchian and we don’t know which are going to be the best blockchain in the future. Overledger easily integrates into existing applications using the Overledger SDK by just adding 3 lines of code. They don’t need to completely rewrite the application like you do with the majority of other projects and all existing java / javascript apps on Windows / Mobile app stores / business applications etc can easily integrate with overledger with minimal changes in just 8 minutes.

Treaty Contracts

What Overledger will allow with Treaty contracts is to use popular programming languages such as Java and create a smart contract in Overledger that interacts with all of the connected blockchains. Even providing Smart contract functionality to blockchains that don’t support them such as Bitcoin. This means that developers don’t have to create all the smart contracts on each blockchain in all the different programming languages but instead just create them in Overledger using languages such as Java that are widely used today. If they need to use a different blockchain then it can be as easy as changing a line of code rather than having to completely rewrite the smart contracts.
Overledger isn’t a blockchain though, so how can it trusted with the smart contract? A Hash of the smart contract is published on any blockchain the MAPP developer requires and when called the smart contract is run its run through a hashing function to check that it matches the Hash value stored on the blockchain, ensuring that it has not been modified.
By running the Smart contract off chain this also increases Scalability enormously. With a blockchain all nodes have to run the smart contract one after another rather than in parallel. Not only do you get the performance benefit of not having to run the code against every single node but you can also run them in parallel to others executing smart contracts.
You can read more about Treaty Contracts here

The different versions of Overledger

Enterprise version

The current live version is the Enterprise version as that is where most of the adoption is taking place in blockchain due to permissioned blockchains being preferred until permissionless blockchains resolve the scalability, privacy and regulatory issues. Please see this article which goes into more details about Entereprise blockchain / adoption. The Enterprise version connects to permissioned blockchains as well as additional features / support suited for Enterprises.

Community version

The community version is due to be released later this year which will allow developers to benefit from creating MAPPs across permissionless blockchains. Developers can publish their MAPPs on the MAPP Store to create additional revenue streams for developers.

Where does Overledger run from? Is it Centralised?

Overledger can run from anywhere. The community version will have instances across multiple public clouds, Enterprises / developers may prefer to host the infrastructure themselves within a consortium which they can and are doing. For example SIA is the leading private Financial Network provider in Europe, it provides a dedicated high speed network which connects all the major banks, central banks, trading venues etc. SIA host Overledger within their private network so that all of those clients can access it in the confinement of their heavily regulated, secure, fast network. AUCloud / UKCLoud host Overledger in their environment to offer as a service to their clients which consist of Governments and critical national infrastructure.
For Blockchain nodes that interact with Overledger the choice is entirely up to the developer. Each member within a consortium may choose to host a node, some developers may prefer to use 3rd party hosting providers such as Infura, or Quant can also host them if they prefer, its entirely their choice.
Overledger allows for higher levels of decentralisation by storing the output across multiple blockchains so you not only benefit from the decentralisation of one blockchain but the combination of all of them. Ultimately though decentralisation is thrown around too much without many actually understanding what it means. It’s impossible to have complete decentralisation, when you sign a transaction to be added to a blockchain ultimately you still connect through a single ISP, connect through a single router, or the input into a transaction is done through a piece of software etc. What matters to be decentralised is where trust is involved. As i have mentioned before you don’t need to trust the OS, it’s just providing instructions on how to interact with the blockchains, the end user is signing the transactions / encrypting at client side. Nothing can be seen or modified with the OS. Even if somehow the transaction did get modified then it would get rejected when consensus is done as the hash / digital signature won’t match at the destination blockchain. Where the transaction actually gets put onto the blockchain is where decentralisation matters, because thats what needs to be trusted and conensus is reached and Overledger enables this to be written across multiple blockchains at the same time.

The Team

The team are very well connected with a wealth of experience at very senior roles at Global enterprises which I will include a few examples below. Gilbert Verdian the CEO was the Head of security for the payment infrastructure for the Bank of England through his CISO role with Vocalink (Mastercard)managing £6 trillion every year. This is treated by the government as critical national infrastructure which is the highest level of criticallity because its so fundamental to the security of the country. They have experience and know what it takes to run a secure financial infrastructure and meeting requirements of regulators. Gilbert was director for Cybersecurity at PWC, Security for HSBC and Ernst & Young as well as various government roles such as the CISO for the Australian NSW Health, Head of Security at the UK government for Ministry of Justice and HM Treasury in addition to being part of the committee for the European Commission, US Federal Reserve and the Bank of England.
Cecilia Harvey is the Chief Operating Officer, where she was previously a Director at HSBC in Global Banking and Markets and before that Director at Vocalink. Cecilia was also Chief Operating Officer at Citi for Markets and Securities Services Technology as well as working for Barclays, Accenture, IBM and Morgan Stanley.
Vijay Verma is the Overledger platform lead with over 15 years of developer experience in latest technologies like Java, Scala, Blockchain & enterprise technology solutions. Over the course of his career, he has worked for a number of prestigious organisations including J&J, Deutsche, HSBC, BNP Paribas, UBS Banks, HMRC and Network Rail.
Guy Dietrich, the managing director of Rockefeller Capital (manages $19 Billion in assets) has joined the board of Quant Network, and has recently personally attended meetings with the Financial Conduct Authority (FCA) with Gilbert

https://preview.redd.it/wj5ubgv4efl31.png?width=566&format=png&auto=webp&s=2c0cb650f6aceae3d133beefdac04ba0aeea63f6
As well as advisors such as Paolo Tasca, the founder and Executive Director of the Centre for Blockchain Technologies (UCL CBT) at University College Londonfounder and executive director as well as Chris Adelsbach, Managing Director at Techstars, the worldwide network that helps entrepreneurs succeed. Techstars has partners such as Amazon, Barclays, Boeing, Ford, Google, Honda, IBM, Microsoft, PWC, Sony, Target, Total, Verizon, Western Union etc.
Due to client demand they are expanding to the US to setup a similar size office where board members such as Guy Dietrich will be extremely valuable in assisting with the expansion.
https://preview.redd.it/7zlrragqffl31.png?width=578&format=png&auto=webp&s=36980e86da6d050f086eb2171f679ac1716f97dc
The most exciting part about the project though is just how much adoption there has been of the platform, from huge global enterprises, governments and cloud providers they are on track for a revenue of $10 million in their first year. I will go through these in the next article, followed by further article explaining how the Token and Treasury works.
You can also find out more info about Quant at the following:
Part One — Blockchain Fundamentals
Part Two — The Layers Of Overledger
Part Three — TrustTag and the Tokenisation of data
Part Four — Features Overledger provides to MAPPs
Part Five — Creating the Standards for Interoperability
Part Six — The Team behind Overledger and Partners
Part Seven — The QNT Token
Part Eight — Enabling Enterprise Mass Adoption
Quant Network Enabling Mass Adoption of Blockchain at a Rapid Pace
Quant Network Partner with SIA, A Game Changer for Mass Blockchain Adoption by Financial Institutions
submitted by xSeq22x to CryptoCurrency [link] [comments]

A new Nano trade exchange was launched a couple of days ago - Here's why anyone who remembers Bitgrail should be be very afraid

This is mostly a duplicate of my summarised responses to that exchange's original announcement threads here and in /nanotrade**.**
The owners of that new exchange are welcome to downvote this new posting of mine, but everyone else can make their own decision about whether to upvote this for posterity's benefit, so that my post gets found in months to come (given that Reddit's search engine is really bad at searching comments.)

Here's what's dodgy about this exchange, and why anyone who remembers BitGrail should be very afraid:
I emphasise that I'm not saying this is a scam. But I am saying it looks like what a scam website would look like and appears to be operating illegally under UK law:

* The domain NanoTrade.co.uk was registered only two days (one working day) before the site went live - meaning it only could have been tested very briefly, (Edit: and could not have been secured against accidentally being taken by another person, which implies incredible lack of planning)
* The domain was registered by NameCheap, with an obscured registrant
* The site was not pre-announced on /Nano Currency nor /NanoTrade
* The site was announced first on /nanotrade (6k subscribers), but only announced here on /nanocurrency (44k subscribers) three days later, demonstrating a lack of knowledge of Nano relative subscribers
* The announcer Paradise2GE claimed Google and Facebook Ads existed prelaunch - but no one of you here saw them because you would have excitedly told us if you had
* No such advertising for the site was noted by me, yet I would have been a key target for it
* Since the domain was not registered, such advertising could not have included, say, a [[email protected]](mailto:[email protected]) mail form, which is incompetent in itself
* Nano Associates Limited was registered with Companies House on 2018-02-28 (as company number 11229688) - to a London mail-forwarding company's central London address (a postcode with 11,000 companies registered at the same address)
* Its sole Director 'Orlando Carugo' has no Google history of being associated with Nano, Cryptocurrency, or finance at all
* Orlando Carugo's profession is listed as 'Sales Director'
* The Google and LinkedIn history of an UK-based 'Orlando Carugo' (a sales professional) can be found, with no reference to cryptocurrency but with references to being willing to work for stock options or commission
* The announcement on /NanoTrade was made by Paradise2GE - an account with a few questions on Bitcoin two years ago, a single comment one year ago, then absolutely nothing until this weekend.
* We know nothing of the overall reputation of the company owners
* The company uses a payment processor https://en.bitcoin.it/wiki/VirWoX which has a daily limit on PayPal withdrawals of 2500EUR. The NanoTrade website however states that up to 90,000 Nano can be sold per PayPal transaction. It seems impossible to reconcile this for me. If 90,000 Nano is sold to PayPal, when would the seller get their money?
* If the answer is that such payments cannot be made, when were the company planning to tell the sellers?
* On being asked on /Nanotrade, Paradise2GE has avoided answering this question in their dissembling answers
* The company is not registered by the FCA
* The company is not registered by HMRC as a money service
* It is a legal requirement for UK based companies to register as money services.
* It is not a get-out to just deal in USD and not GDP, yet Patadise2GE has attempted to use that get-out in their answers
* Paradise2GE has dissembled when answering questions as to why Nano Associates is not registered with FCA or HMRC
* Paradise2GE claimed 1000 trades on their first day... for an unannounced site...purely from a posting that had around 40 up votes at the time. It's a lie. Not even Nanex gets that many trades on a good day.
* Given a supposed 1000 trades in a day, 1440 minutes in a day, and 25% of Nano staked on Binance, we should expect to see >5Nano transactions coming out of the Binance hot wallet at least every 10 minutes or so. I don't see those
* The site works poorly on Android, showing a lack of technical skill in its developers
* The announcement of the exchange on /nanocurrency was by SMcArthurs - a one year old account, with very few postings, and no history in the /nanocurrency or /nanotrade subs
* Someone downvoted my reasonable questions on /nanotrade. I can think of only one person who would want to do that, if malicious
* Someone downvoted someone thanking me for my questions on /nanotrade. I can think of only one person who would want to do that, if malicious
* User astricali has posted at 2018-12-03 05:00GMT that they made a successful sale of 999.99 Nano. I performed a text extraction of the posted image address, which they were apparently instructed to send to, but I notice that although that address indeed Received a 999.99 amount from the Binance Representative at 2018-12-04 02:17:01 (Timezone unknown), the address has never actually Pocketed 999.99 Nano - the payment is still Pending.This is odd, since once might expect an efficient provider to pocket the Nano they receive asap, to sell it on the markets
* The address has however received a range of 8 payments ranging from 1.99 Nano to 1,847.99 Nano. That surprises me, because I would expect a payment provider to use a unique address for each received payment.
* The address has only ever sent a payment once, to KuCoin, on an unknown date before 2018-07-25
* Paradise2GE and SMcArthurs have been extremely quiet in response to these complaints levelled against their site
* Edit: Why would they be selling Nano at 1.00 USD at the moment when Nano is on Binance at 0.94?
* Edit: Seeing 403 Forbidden error 2018-12-05 23:38GMT
* Edit: Don't even get me started on the Money Laundering, Terrorist Financing and Transfer of Funds (Information on the Payer) Regulations Regulations 2017
* Edit: It's 12 days later - 18-Dec-2018. The 999 Nano still hasn't been pocketed at address. In 12 days neither promoter has denied that's it's their account. They are therefore probably incompetent even if non-malicious.
* Also noticed something I should have picked up before: That address is Represented by Nanowallet.io - which means it's probably an account created on Nanowallet.io. Any 'real' exchange would need, at the very minimum, to run it's own node so that it can be online 24/7 - and if so would most likely Represent itself. Specifically choosing Nanowallet.io as their Representative after installing a full node would be an odd decision, given that they could help decentralize.
'm at way over 22 red flags here. I hope I save someone.
submitted by throwawayLouisa to nanocurrency [link] [comments]

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?

Won't let me post the related images here, but please refer to this article which includes them https://medium.com/@CryptoSeq/what-is-a-blockchain-operating-system-and-what-are-the-benefits-c561d8275de6
Overledger is the world’s first blockchain operating system (OS) that not only inter-connects blockchains but also existing enterprise platforms, applications and networks to blockchain and facilitates the creation of internet scale multi-chain applications otherwise known as mApps.
In less than 10 months since launching Overledger they have provided interoperability with the full range of DLT technologies from all the leading Enterprise Permissioned blockchains such as Hyperledger, R3’s Corda, JP Morgan’s Quorum, permissioned variants of Ethereum and Ripple (XRPL) as well as the leading Public Permissionless blockchains / DAGs such as Bitcoin, Stellar, Ethereum, IOTA and EOS as well as the most recent blockchain to get added Binance Chain. In addition, Overledger also connects to Existing Networks / Off Chain / Oracle functionality and it does all of this in a way that is hugely scalable, without imposing restrictions / requiring blockchains to fork their code and can easily integrate into existing applications / networks by just adding 3 lines of code.

What is a blockchain Operating system?

You will be familiar with Operating systems such as Microsoft Windows, Apple Mac OS, Google’s Android etc but these are all Hardware based Operating Systems. Hardware based Operating Systems provide a platform to build and use applications that abstracts all of the complexities involved with integrating with all the hardware resources such as CPU, Memory, Storage, Mouse, Keyboard, Video etc so software can easily integrate with it. It provides interoperability between the Hardware devices and Software.
Overledger is a Blockchain Operating System, it provides a platform to build and use applications that abstracts all of the complexities involved with integrating with all the different blockchains, different OP_Codes being used, messaging formats etc as well as connecting to existing non-blockchain networks. It provides interoperability between Blockchains, Existing Networks and Software / MAPPs

How is Overledger different to other interoperability projects?

Other projects are trying to achieve interoperability by adding another blockchain on top of existing blockchains. This adds a lot of overhead, complexity, and technical risk. There are a few variants but essentially they either need to create custom connectors for each connected blockchain and / or require connected chains to fork their code to enable interoperability. An example of the process can be seen below:
User sends transaction to a multi sig contract on Blockchain A, wait for consensus to be reached on Blockchain A
A custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the smart contract on Blockchain A. Once they see the transaction, they then sign a transaction on the Interoperability blockchain as proof the event has happened on Blockchain A.
Wait for consensus to be reached on the Interoperability Blockchain.
The DAPP running on the Interoperability Blockchain is then updated with the info about the transaction occurring on Blockchain A and then signs a transaction on the Interoperability blockchain to a multi sig contract on the Interoperability Blockchain.
Wait for consensus to be reached on the interoperability Blockchain.
A different custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the Smart Contract on the Interoperability Blockchain which are destined for Blockchain B. Once they see the transaction, they sign a transaction on Blockchain B. Wait for consensus to be reached on Blockchain B.

Other solutions require every connecting blockchain to fork their code and implement their Interoperability protocol. This means the same type of connector can be used instead of a custom one for every blockchain however every connected blockchain has to fork their code to implement the protocol. This enforces a lot of restrictions on what the connected blockchains can implement going forward.
Some problems with these methods:

But some Interoperability blockchains say they are infinitely scalable?

If the interoperability blockchain is limited to say 200 tps then the idea is to just have multiple instances of the blockchain and run them in parallel, so you benefit from the aggregated tps, but just how feasible is that? Lets say you want to connect Corda (capable of 2000+ tps) to Hyperledger (capable of up to 20,000 tps with recent upgrade). (Permissioned blockchains such as Hyperledger and Corda aren’t one big blockchain like say Bitcoin or Ethereum, they have separate instances for each consortium and each is capable of those speeds). So even when you have just 1 DAPP from one consortium that wants to connect Corda to Hyperledger and use 2000 tps for their DAPP, you would need 100 instances of the Interoperability blockchain, each with their own validators (which maybe 100–200 nodes each). So, 1 DAPP would need to cover the costs for 100 instances of the blockchain and running costs for 10,000 nodes…This is just one DAPP connected to one instance of a two permissioned blockchains, which are still in the early stages. Other blockchains such as Red Belly Blockchain can achieve 440,000 tps, and this will surely increase as the technology matures. There is also the added complexity of then aggregating the results / co-coordinating between the different instances of the blockchain. Then there are the environmental concerns, the power required for all of these instances / nodes is not sustainable.
It’s not just transactions per second of the blockchain as well, its the latency of all these added consensuses along the path to reach to the destination and not knowing whether the security of each of the hops is sufficient and can be trusted. To see examples of how this potential issue as well as others effect Cosmos you can see my article here. I recommend also reading a blog done by the CEO of Quant, Gilbert Verdian, which explains how Overledger differs here as well as detailed in the whitepaper here.

Overledger’s approach

In 1973 Vint Cerf invented the protocol that rules them all: TCP/IP. Most people have never heard of it. But it describes the fundamental architecture of the internet, and it made possible Wi-Fi, Ethernet, LANs, the World Wide Web, e-mail, FTP, 3G/4G — as well as all of the inventions built upon those inventions.
Wired: So from the beginning, people, including yourself, had a vision of where the internet was going to go. Are you surprised, though, that at this point the IP protocol seems to beat almost anything it comes up against? Cerf: I’m not surprised at all because we designed it to do that. This was very conscious. Something we did right at the very beginning, when we were writing the specifications, we wanted to make this a future-proof protocol. And so the tactic that we used to achieve that was to say that the protocol did not know how — the packets of the internet protocol layer didn’t know how they were being carried. And they didn’t care whether it was a satellite link or mobile radio link or an optical fiber or something else. We were very, very careful to isolate that protocol layer from any detailed knowledge of how it was being carried. Plainly, the software had to know how to inject it into a radio link, or inject it into an optical fiber, or inject it into a satellite connection. But the basic protocol didn’t know how that worked. And the other thing that we did was to make sure that the network didn’t know what the packets had in them. We didn’t encrypt them to prevent it from knowing — we just didn’t make it have to know anything. It’s just a bag of bits as far as the net was concerned. We were very successful in these two design features, because every time a new kind of communications technology came along, like frame relay or asynchronous transfer mode or passive optical networking or mobile radio‚ all of these different ways of communicating could carry internet packets. We would hear people saying, ‘The internet will be replaced by X25,’ or ‘The internet will be replaced by frame relay,’ or ‘The internet will be replaced by APM,’ or ‘The internet will be replaced by add-and-drop multiplexers.’ Of course, the answer is, ‘No, it won’t.’ It just runs on top of everything. And that was by design. I’m actually very proud of the fact that we thought of that and carefully designed that capability into the system.
This is the approach Quant have taken with their Blockchain OS, Overledger to solve Blockchain interoperability. Compared to other Interoperability platforms that are trying to achieve interoperability at the transaction layer by connecting two blockchains via another blockchain, these will be ultimately be made redundant once faster methods are released. Overledger is designed to be future proof by isolating the layers so it doesn’t matter whether it’s a permissioned blockchain, permissionless, DAG, Legacy network, POW, POS etc because it abstracts the transaction layer from the messaging layer and runs on top of blockchains. Just as the Internet wasn’t replaced by X25, frame relay, APM etc, Overledger is designed to be future proof as it just runs on top of the Blockchains rather than being a blockchain itself. So, if a new blockchain technology comes out that is capable of 100,000 TPS then it can easily be integrated as Overledger just runs on top of it.
Likewise, with protocols such as HTTPS, SSH etc these will also emerge for blockchains such as ZK-Snarks and other privacy implementations as well as other features made available, all will be compatible with Overledger as its just sitting on top rather than forcing their own implementation for all.
It doesn’t require blockchains to fork their code to make it compatible, it doesn’t add the overhead of adding another blockchain with another consensus mechanism (most likely multiple as it has to go through many hops). All of this adds a lot of latency and restrictions which isn’t needed. The developer can just choose which blockchains they want to connect and use the consensus mechanisms of those blockchains rather than forced to use one.
Overledger can provide truly internet scale to meet whatever the demands may be, whether that be connecting multiple red belly blockchains together with 440,000 tps it doesn’t matter as it doesn’t add its consensus mechanism and uses proven internet scale technology such as that based on Kubernetes, which is where each task is split up into a self-contained container and each task is scaled out by deploying more to meet demand. Kubernetes is what runs Google Search engine where they scale up and down billions of containers every week.
Due to this being more of a summary, I strongly recommend you read this article which goes into detail about the different layers in Overledger.

But how does it provide the security of a blockchain if it doesn’t add its own blockchain?

This is often misunderstood by people. Overledger is not a blockchain however it still uses a blockchain for security, immutability, traceability etc, just rather than force people to use their own blockchain, it utilises the source and destination blockchains instead. The key thing to understand is the use of its patented technology TrustTag, which was made freely available to anyone with the Overledger SDK.
Please see this article which explains TrustTag in detail with examples showing how hashing / digital signatures work etc
A quick overview is if i want to send data from one blockchain to another the Overledger SDK using Trusttag will put the data through a hashing algorithm. The Hash is then included in digital signature as part of the transaction which is signed by the user’s private key and then validated through normal consensus and stored as metadata on the source blockchain. The message is then sent to the MAPP off chain. The MAPP periodically scans the blockchains and puts the received message through a hashing algorithm and compares the Hash to the one stored as metadata on the blockchain. This ensures that the message hasn’t been modified in transit, the message is encrypted and only the Hash is stored on chain so completely private, provides immutability as it was signed by the user’s private key which only they have and is stored on the blockchain for high availability and secure so that it can’t be modified, with the ability to refer back to it at any point in time.
Despite Overledger being a very secure platform, with the team having a very strong security background such as Gilbert who was chief security information officer for Vocalink (Bank of England) managing £6 trillion of payments every year and classified as national critical security (highest level you can get), ultimately you don’t need to trust Overledger. Transactions are signed and encrypted at client side, so Overledger has no way of being able to see the contents. It can’t modify any transaction as the digital signature which includes a hash of the transaction would be different so would get rejected. Transaction security isn’t reduced as it is signed at source using however many nodes the source blockchain has rather than a smaller amount of nodes with an interoperability blockchain in the middle.

Patents

The core code of Overledger is closed source and patented, one of the recent patents can be seen here, along with TrustTag and further ones are being filed. The Overledger SDK is open source and is available in Java and Javascript currently, with plans to support Pyhton and Ruby in the near future. Java and Javascript are the most popular programming languages used today.
The Blockchain connectors are also open source and this allows the community to create connectors to connect their favourite blockchain so that it can benefit from blockchain interoperability and making it available to all enterprises / developers currently utilising Overledger. Creating is currently taking around a week to implement and so far, have been added based upon client demand.

Multi Chain Applications (MAPPs)

Multi Chain Applications (MAPPs) enable an application to use multiple blockchains and interoperate between them. Treaty Contracts enable a developer to build a MAPP and then change the underlying blockchain it uses with just a quick change of couple of lines of code. This is vital for enterprises as it’s still early days in Blockchian and we don’t know which are going to be the best blockchain in the future. Overledger easily integrates into existing applications using the Overledger SDK by just adding 3 lines of code. They don’t need to completely rewrite the application like you do with the majority of other projects and all existing java / javascript apps on Windows / Mobile app stores / business applications etc can easily integrate with overledger with minimal changes in just 8 minutes.

Treaty Contracts

What Overledger will allow with Treaty contracts is to use popular programming languages such as Java and create a smart contract in Overledger that interacts with all of the connected blockchains. Even providing Smart contract functionality to blockchains that don’t support them such as Bitcoin. This means that developers don’t have to create all the smart contracts on each blockchain in all the different programming languages but instead just create them in Overledger using languages such as Java that are widely used today. If they need to use a different blockchain then it can be as easy as changing a line of code rather than having to completely rewrite the smart contracts.
Overledger isn’t a blockchain though, so how can it trusted with the smart contract? A Hash of the smart contract is published on any blockchain the MAPP developer requires and when called the smart contract is run its run through a hashing function to check that it matches the Hash value stored on the blockchain, ensuring that it has not been modified.
By running the Smart contract off chain this also increases Scalability enormously. With a blockchain all nodes have to run the smart contract one after another rather than in parallel. Not only do you get the performance benefit of not having to run the code against every single node but you can also run them in parallel to others executing smart contracts.
You can read more about Treaty Contracts here

The different versions of Overledger

Enterprise version

The current live version is the Enterprise version as that is where most of the adoption is taking place in blockchain due to permissioned blockchains being preferred until permissionless blockchains resolve the scalability, privacy and regulatory issues. Please see this article which goes into more details about Entereprise blockchain / adoption. The Enterprise version connects to permissioned blockchains as well as additional features / support suited for Enterprises.

Community version

The community version is due to be released later this year which will allow developers to benefit from creating MAPPs across permissionless blockchains. Developers can publish their MAPPs on the MAPP Store to create additional revenue streams for developers.

Where does Overledger run from? Is it Centralised?

Overledger can run from anywhere. The community version will have instances across multiple public clouds, Enterprises / developers may prefer to host the infrastructure themselves within a consortium which they can and are doing. For example SIA is the leading private Financial Network provider in Europe, it provides a dedicated high speed network which connects all the major banks, central banks, trading venues etc. SIA host Overledger within their private network so that all of those clients can access it in the confinement of their heavily regulated, secure, fast network. AUCloud / UKCLoud host Overledger in their environment to offer as a service to their clients which consist of Governments and critical national infrastructure.
For Blockchain nodes that interact with Overledger the choice is entirely up to the developer. Each member within a consortium may choose to host a node, some developers may prefer to use 3rd party hosting providers such as Infura, or Quant can also host them if they prefer, its entirely their choice.
Overledger allows for higher levels of decentralisation by storing the output across multiple blockchains so you not only benefit from the decentralisation of one blockchain but the combination of all of them. Ultimately though decentralisation is thrown around too much without many actually understanding what it means. It’s impossible to have complete decentralisation, when you sign a transaction to be added to a blockchain ultimately you still connect through a single ISP, connect through a single router, or the input into a transaction is done through a piece of software etc. What matters to be decentralised is where trust is involved. As i have mentioned before you don’t need to trust the OS, it’s just providing instructions on how to interact with the blockchains, the end user is signing the transactions / encrypting at client side. Nothing can be seen or modified with the OS. Even if somehow the transaction did get modified then it would get rejected when consensus is done as the hash / digital signature won’t match at the destination blockchain. Where the transaction actually gets put onto the blockchain is where decentralisation matters, because thats what needs to be trusted and conensus is reached and Overledger enables this to be written across multiple blockchains at the same time.

The Team

The team are very well connected with a wealth of experience at very senior roles at Global enterprises which I will include a few examples below. Gilbert Verdian the CEO was the Head of security for the payment infrastructure for the Bank of England through his CISO role with Vocalink (Mastercard)managing £6 trillion every year. This is treated by the government as critical national infrastructure which is the highest level of criticallity because its so fundamental to the security of the country. They have experience and know what it takes to run a secure financial infrastructure and meeting requirements of regulators. Gilbert was director for Cybersecurity at PWC, Security for HSBC and Ernst & Young as well as various government roles such as the CISO for the Australian NSW Health, Head of Security at the UK government for Ministry of Justice and HM Treasury in addition to being part of the committee for the European Commission, US Federal Reserve and the Bank of England.
Cecilia Harvey is the Chief Operating Officer, where she was previously a Director at HSBC in Global Banking and Markets and before that Director at Vocalink. Cecilia was also Chief Operating Officer at Citi for Markets and Securities Services Technology as well as working for Barclays, Accenture, IBM and Morgan Stanley.
Vijay Verma is the Overledger platform lead with over 15 years of developer experience in latest technologies like Java, Scala, Blockchain & enterprise technology solutions. Over the course of his career, he has worked for a number of prestigious organisations including J&J, Deutsche, HSBC, BNP Paribas, UBS Banks, HMRC and Network Rail.
Guy Dietrich, the managing director of Rockefeller Capital (manages $19 Billion in assets) has joined the board of Quant Network, and has recently personally attended meetings with the Financial Conduct Authority (FCA) with Gilbert
https://twitter.com/gverdian/status/1168628166644183042
As well as advisors such as Paolo Tasca, the founder and Executive Director of the Centre for Blockchain Technologies (UCL CBT) at University College Londonfounder and executive director as well as Chris Adelsbach, Managing Director at Techstars, the worldwide network that helps entrepreneurs succeed. Techstars has partners such as Amazon, Barclays, Boeing, Ford, Google, Honda, IBM, Microsoft, PWC, Sony, Target, Total, Verizon, Western Union etc.
Due to client demand they are expanding to the US to setup a similar size office where board members such as Guy Dietrich will be extremely valuable in assisting with the expansion.
The most exciting part about the project though is just how much adoption there has been of the platform, from huge global enterprises, governments and cloud providers they are on track for a revenue of $10 million in their first year. I will go through these in the next article, followed by further article explaining how the Token and Treasury works.
You can also find out more info about Quant at the following:
Part One — Blockchain Fundamentals
Part Two — The Layers Of Overledger
Part Three — TrustTag and the Tokenisation of data
Part Four — Features Overledger provides to MAPPs
Part Five — Creating the Standards for Interoperability
Part Six — The Team behind Overledger and Partners
Part Seven — The QNT Token
Part Eight — Enabling Enterprise Mass Adoption
Quant Network Enabling Mass Adoption of Blockchain at a Rapid Pace
Quant Network Partner with SIA, A Game Changer for Mass Blockchain Adoption by Financial Institutions
submitted by xSeq22x to CryptoMoonShots [link] [comments]

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?
Overledger is the world’s first blockchain operating system (OS) that not only inter-connects blockchains but also existing enterprise platforms, applications and networks to blockchain and facilitates the creation of internet scale multi-chain applications otherwise known as mApps.
In less than 10 months since launching Overledger they have provided interoperability with the full range of DLT technologies from all the leading Enterprise Permissioned blockchains such as Hyperledger, R3’s Corda, JP Morgan’s Quorum, permissioned variants of Ethereum and Ripple (XRPL) as well as the leading Public Permissionless blockchains / DAGs such as Bitcoin, Stellar, Ethereum, IOTA and EOS as well as the most recent blockchain to get added Binance Chain. In addition, Overledger also connects to Existing Networks / Off Chain / Oracle functionality and it does all of this in a way that is hugely scalable, without imposing restrictions / requiring blockchains to fork their code and can easily integrate into existing applications / networks by just adding 3 lines of code.

https://preview.redd.it/jb8r8b1qdfl31.png?width=1920&format=png&auto=webp&s=b7e41db0dadd110841561ad077a8735c93b4e59b

What is a blockchain Operating system?

You will be familiar with Operating systems such as Microsoft Windows, Apple Mac OS, Google’s Android etc but these are all Hardware based Operating Systems. Hardware based Operating Systems provide a platform to build and use applications that abstracts all of the complexities involved with integrating with all the hardware resources such as CPU, Memory, Storage, Mouse, Keyboard, Video etc so software can easily integrate with it. It provides interoperability between the Hardware devices and Software.
Overledger is a Blockchain Operating System, it provides a platform to build and use applications that abstracts all of the complexities involved with integrating with all the different blockchains, different OP_Codes being used, messaging formats etc as well as connecting to existing non-blockchain networks. It provides interoperability between Blockchains, Existing Networks and Software / MAPPs

How is Overledger different to other interoperability projects?

Other projects are trying to achieve interoperability by adding another blockchain on top of existing blockchains. This adds a lot of overhead, complexity, and technical risk. There are a few variants but essentially they either need to create custom connectors for each connected blockchain and / or require connected chains to fork their code to enable interoperability. An example of the process can be seen below:
User sends transaction to a multi sig contract on Blockchain A, wait for consensus to be reached on Blockchain A
A custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the smart contract on Blockchain A. Once they see the transaction, they then sign a transaction on the Interoperability blockchain as proof the event has happened on Blockchain A.
Wait for consensus to be reached on the Interoperability Blockchain.
The DAPP running on the Interoperability Blockchain is then updated with the info about the transaction occurring on Blockchain A and then signs a transaction on the Interoperability blockchain to a multi sig contract on the Interoperability Blockchain.
Wait for consensus to be reached on the interoperability Blockchain.
A different custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the Smart Contract on the Interoperability Blockchain which are destined for Blockchain B. Once they see the transaction, they sign a transaction on Blockchain B. Wait for consensus to be reached on Blockchain B.

https://preview.redd.it/q2znoy2sdfl31.png?width=1558&format=png&auto=webp&s=12075bd57eef24d43a8403eec5c349e084f84342
Other solutions require every connecting blockchain to fork their code and implement their Interoperability protocol. This means the same type of connector can be used instead of a custom one for every blockchain however every connected blockchain has to fork their code to implement the protocol. This enforces a lot of restrictions on what the connected blockchains can implement going forward.

https://preview.redd.it/rko07t8tdfl31.png?width=1561&format=png&auto=webp&s=0a925f3cf7ed20f1d3230f8b07b10189b3293ffa
Some problems with these methods:
  • They add a lot of Overhead / Latency. Rather than just having the consensus of Blockchain A and B, you add the consensus mechanism of the Interoperability Blockchain as well.
  • Decentralisation / transaction security is reduced. If Blockchain A and Blockchain B each have 1,000 nodes validating transactions, yet the Interoperability Blockchain only has 100 nodes then you have reduced the security of the transaction from being validated by 1000 to validated by 100.
  • Security of the Interoperability Blockchain must be greater than the sum of all transactions going through it. JP Morgan transfer $6 Trillion every day, if they move that onto blockchain and need interoperability between two Permissioned blockchains that have to connect via a public Interoperability blockchain, then it would always have to be more costly to attack the blockchain than the value from stealing the funds transacted through the blockchain.
  • Imposes a lot of limitations on connected blockchains to fork their code which may mean they have to drop some existing functionality as well as prevent them from adding certain features in the future.
  • Creates a single point of failure — If the Interoperability blockchain or connector has an issue then this affects each connected blockchain.
  • It doesn’t scale and acts as a bottleneck. Not only does building complex custom connectors not scale but the Interoperability blockchain that they are forcing all transactions to go through has to be faster than the combined throughput of connected blockchains. These Interoperability blockchains have limited tps, with the most being around 200 and is a trade off between performance and decentralisation.

But some Interoperability blockchains say they are infinitely scalable?

If the interoperability blockchain is limited to say 200 tps then the idea is to just have multiple instances of the blockchain and run them in parallel, so you benefit from the aggregated tps, but just how feasible is that? Lets say you want to connect Corda (capable of 2000+ tps) to Hyperledger (capable of up to 20,000 tps with recent upgrade). (Permissioned blockchains such as Hyperledger and Corda aren’t one big blockchain like say Bitcoin or Ethereum, they have separate instances for each consortium and each is capable of those speeds). So even when you have just 1 DAPP from one consortium that wants to connect Corda to Hyperledger and use 2000 tps for their DAPP, you would need 100 instances of the Interoperability blockchain, each with their own validators (which maybe 100–200 nodes each). So, 1 DAPP would need to cover the costs for 100 instances of the blockchain and running costs for 10,000 nodes…This is just one DAPP connected to one instance of a two permissioned blockchains, which are still in the early stages. Other blockchains such as Red Belly Blockchain can achieve 440,000 tps, and this will surely increase as the technology matures. There is also the added complexity of then aggregating the results / co-coordinating between the different instances of the blockchain. Then there are the environmental concerns, the power required for all of these instances / nodes is not sustainable.
https://preview.redd.it/j6ba1ioudfl31.png?width=1070&format=png&auto=webp&s=53f81fb699d45734e15cce4f856fc50386dea246
It’s not just transactions per second of the blockchain as well, its the latency of all these added consensuses along the path to reach to the destination and not knowing whether the security of each of the hops is sufficient and can be trusted. To see examples of how this potential issue as well as others effect Cosmos you can see my article here. I recommend also reading a blog done by the CEO of Quant, Gilbert Verdian, which explains how Overledger differs here as well as detailed in the whitepaper here.

https://preview.redd.it/92cgbikwdfl31.png?width=1169&format=png&auto=webp&s=2fb7ea78e3010ee90dce0c45f5a6f361d13f52fd

Overledger’s approach

In 1973 Vint Cerf invented the protocol that rules them all: TCP/IP. Most people have never heard of it. But it describes the fundamental architecture of the internet, and it made possible Wi-Fi, Ethernet, LANs, the World Wide Web, e-mail, FTP, 3G/4G — as well as all of the inventions built upon those inventions.
Wired: So from the beginning, people, including yourself, had a vision of where the internet was going to go. Are you surprised, though, that at this point the IP protocol seems to beat almost anything it comes up against? Cerf: I’m not surprised at all because we designed it to do that. This was very conscious. Something we did right at the very beginning, when we were writing the specifications, we wanted to make this a future-proof protocol. And so the tactic that we used to achieve that was to say that the protocol did not know how — the packets of the internet protocol layer didn’t know how they were being carried. And they didn’t care whether it was a satellite link or mobile radio link or an optical fiber or something else. We were very, very careful to isolate that protocol layer from any detailed knowledge of how it was being carried. Plainly, the software had to know how to inject it into a radio link, or inject it into an optical fiber, or inject it into a satellite connection. But the basic protocol didn’t know how that worked. And the other thing that we did was to make sure that the network didn’t know what the packets had in them. We didn’t encrypt them to prevent it from knowing — we just didn’t make it have to know anything. It’s just a bag of bits as far as the net was concerned. We were very successful in these two design features, because every time a new kind of communications technology came along, like frame relay or asynchronous transfer mode or passive optical networking or mobile radio‚ all of these different ways of communicating could carry internet packets. We would hear people saying, ‘The internet will be replaced by X25,’ or ‘The internet will be replaced by frame relay,’ or ‘The internet will be replaced by APM,’ or ‘The internet will be replaced by add-and-drop multiplexers.’ Of course, the answer is, ‘No, it won’t.’ It just runs on top of everything. And that was by design. I’m actually very proud of the fact that we thought of that and carefully designed that capability into the system.
This is the approach Quant have taken with their Blockchain OS, Overledger to solve Blockchain interoperability. Compared to other Interoperability platforms that are trying to achieve interoperability at the transaction layer by connecting two blockchains via another blockchain, these will be ultimately be made redundant once faster methods are released. Overledger is designed to be future proof by isolating the layers so it doesn’t matter whether it’s a permissioned blockchain, permissionless, DAG, Legacy network, POW, POS etc because it abstracts the transaction layer from the messaging layer and runs on top of blockchains. Just as the Internet wasn’t replaced by X25, frame relay, APM etc, Overledger is designed to be future proof as it just runs on top of the Blockchains rather than being a blockchain itself. So, if a new blockchain technology comes out that is capable of 100,000 TPS then it can easily be integrated as Overledger just runs on top of it.
Likewise, with protocols such as HTTPS, SSH etc these will also emerge for blockchains such as ZK-Snarks and other privacy implementations as well as other features made available, all will be compatible with Overledger as its just sitting on top rather than forcing their own implementation for all.
It doesn’t require blockchains to fork their code to make it compatible, it doesn’t add the overhead of adding another blockchain with another consensus mechanism (most likely multiple as it has to go through many hops). All of this adds a lot of latency and restrictions which isn’t needed. The developer can just choose which blockchains they want to connect and use the consensus mechanisms of those blockchains rather than forced to use one.
Overledger can provide truly internet scale to meet whatever the demands may be, whether that be connecting multiple red belly blockchains together with 440,000 tps it doesn’t matter as it doesn’t add its consensus mechanism and uses proven internet scale technology such as that based on Kubernetes, which is where each task is split up into a self-contained container and each task is scaled out by deploying more to meet demand. Kubernetes is what runs Google Search engine where they scale up and down billions of containers every week.
Due to this being more of a summary, I strongly recommend you read this article which goes into detail about the different layers in Overledger.

https://preview.redd.it/zzz2b4oydfl31.png?width=1126&format=png&auto=webp&s=1a8c9d44445324722ca43fdfa0038a386d848713

But how does it provide the security of a blockchain if it doesn’t add its own blockchain?

This is often misunderstood by people. Overledger is not a blockchain however it still uses a blockchain for security, immutability, traceability etc, just rather than force people to use their own blockchain, it utilises the source and destination blockchains instead. The key thing to understand is the use of its patented technology TrustTag, which was made freely available to anyone with the Overledger SDK.
Please see this article which explains TrustTag in detail with examples showing how hashing / digital signatures work etc
A quick overview is if i want to send data from one blockchain to another the Overledger SDK using Trusttag will put the data through a hashing algorithm. The Hash is then included in digital signature as part of the transaction which is signed by the user’s private key and then validated through normal consensus and stored as metadata on the source blockchain. The message is then sent to the MAPP off chain. The MAPP periodically scans the blockchains and puts the received message through a hashing algorithm and compares the Hash to the one stored as metadata on the blockchain. This ensures that the message hasn’t been modified in transit, the message is encrypted and only the Hash is stored on chain so completely private, provides immutability as it was signed by the user’s private key which only they have and is stored on the blockchain for high availability and secure so that it can’t be modified, with the ability to refer back to it at any point in time.
Despite Overledger being a very secure platform, with the team having a very strong security background such as Gilbert who was chief security information officer for Vocalink (Bank of England) managing £6 trillion of payments every year and classified as national critical security (highest level you can get), ultimately you don’t need to trust Overledger. Transactions are signed and encrypted at client side, so Overledger has no way of being able to see the contents. It can’t modify any transaction as the digital signature which includes a hash of the transaction would be different so would get rejected. Transaction security isn’t reduced as it is signed at source using however many nodes the source blockchain has rather than a smaller amount of nodes with an interoperability blockchain in the middle.

Patents

The core code of Overledger is closed source and patented, one of the recent patents can be seen here, along with TrustTag and further ones are being filed. The Overledger SDK is open source and is available in Java and Javascript currently, with plans to support Pyhton and Ruby in the near future. Java and Javascript are the most popular programming languages used today.
The Blockchain connectors are also open source and this allows the community to create connectors to connect their favourite blockchain so that it can benefit from blockchain interoperability and making it available to all enterprises / developers currently utilising Overledger. Creating is currently taking around a week to implement and so far, have been added based upon client demand.

Multi Chain Applications (MAPPs)

Multi Chain Applications (MAPPs) enable an application to use multiple blockchains and interoperate between them. Treaty Contracts enable a developer to build a MAPP and then change the underlying blockchain it uses with just a quick change of couple of lines of code. This is vital for enterprises as it’s still early days in Blockchian and we don’t know which are going to be the best blockchain in the future. Overledger easily integrates into existing applications using the Overledger SDK by just adding 3 lines of code. They don’t need to completely rewrite the application like you do with the majority of other projects and all existing java / javascript apps on Windows / Mobile app stores / business applications etc can easily integrate with overledger with minimal changes in just 8 minutes.

Treaty Contracts

What Overledger will allow with Treaty contracts is to use popular programming languages such as Java and create a smart contract in Overledger that interacts with all of the connected blockchains. Even providing Smart contract functionality to blockchains that don’t support them such as Bitcoin. This means that developers don’t have to create all the smart contracts on each blockchain in all the different programming languages but instead just create them in Overledger using languages such as Java that are widely used today. If they need to use a different blockchain then it can be as easy as changing a line of code rather than having to completely rewrite the smart contracts.
Overledger isn’t a blockchain though, so how can it trusted with the smart contract? A Hash of the smart contract is published on any blockchain the MAPP developer requires and when called the smart contract is run its run through a hashing function to check that it matches the Hash value stored on the blockchain, ensuring that it has not been modified.
By running the Smart contract off chain this also increases Scalability enormously. With a blockchain all nodes have to run the smart contract one after another rather than in parallel. Not only do you get the performance benefit of not having to run the code against every single node but you can also run them in parallel to others executing smart contracts.
You can read more about Treaty Contracts here

The different versions of Overledger

Enterprise version

The current live version is the Enterprise version as that is where most of the adoption is taking place in blockchain due to permissioned blockchains being preferred until permissionless blockchains resolve the scalability, privacy and regulatory issues. Please see this article which goes into more details about Entereprise blockchain / adoption. The Enterprise version connects to permissioned blockchains as well as additional features / support suited for Enterprises.

Community version

The community version is due to be released later this year which will allow developers to benefit from creating MAPPs across permissionless blockchains. Developers can publish their MAPPs on the MAPP Store to create additional revenue streams for developers.

Where does Overledger run from? Is it Centralised?

Overledger can run from anywhere. The community version will have instances across multiple public clouds, Enterprises / developers may prefer to host the infrastructure themselves within a consortium which they can and are doing. For example SIA is the leading private Financial Network provider in Europe, it provides a dedicated high speed network which connects all the major banks, central banks, trading venues etc. SIA host Overledger within their private network so that all of those clients can access it in the confinement of their heavily regulated, secure, fast network. AUCloud / UKCLoud host Overledger in their environment to offer as a service to their clients which consist of Governments and critical national infrastructure.
For Blockchain nodes that interact with Overledger the choice is entirely up to the developer. Each member within a consortium may choose to host a node, some developers may prefer to use 3rd party hosting providers such as Infura, or Quant can also host them if they prefer, its entirely their choice.
Overledger allows for higher levels of decentralisation by storing the output across multiple blockchains so you not only benefit from the decentralisation of one blockchain but the combination of all of them. Ultimately though decentralisation is thrown around too much without many actually understanding what it means. It’s impossible to have complete decentralisation, when you sign a transaction to be added to a blockchain ultimately you still connect through a single ISP, connect through a single router, or the input into a transaction is done through a piece of software etc. What matters to be decentralised is where trust is involved. As i have mentioned before you don’t need to trust the OS, it’s just providing instructions on how to interact with the blockchains, the end user is signing the transactions / encrypting at client side. Nothing can be seen or modified with the OS. Even if somehow the transaction did get modified then it would get rejected when consensus is done as the hash / digital signature won’t match at the destination blockchain. Where the transaction actually gets put onto the blockchain is where decentralisation matters, because thats what needs to be trusted and conensus is reached and Overledger enables this to be written across multiple blockchains at the same time.

The Team

The team are very well connected with a wealth of experience at very senior roles at Global enterprises which I will include a few examples below. Gilbert Verdian the CEO was the Head of security for the payment infrastructure for the Bank of England through his CISO role with Vocalink (Mastercard)managing £6 trillion every year. This is treated by the government as critical national infrastructure which is the highest level of criticallity because its so fundamental to the security of the country. They have experience and know what it takes to run a secure financial infrastructure and meeting requirements of regulators. Gilbert was director for Cybersecurity at PWC, Security for HSBC and Ernst & Young as well as various government roles such as the CISO for the Australian NSW Health, Head of Security at the UK government for Ministry of Justice and HM Treasury in addition to being part of the committee for the European Commission, US Federal Reserve and the Bank of England.
Cecilia Harvey is the Chief Operating Officer, where she was previously a Director at HSBC in Global Banking and Markets and before that Director at Vocalink. Cecilia was also Chief Operating Officer at Citi for Markets and Securities Services Technology as well as working for Barclays, Accenture, IBM and Morgan Stanley.
Vijay Verma is the Overledger platform lead with over 15 years of developer experience in latest technologies like Java, Scala, Blockchain & enterprise technology solutions. Over the course of his career, he has worked for a number of prestigious organisations including J&J, Deutsche, HSBC, BNP Paribas, UBS Banks, HMRC and Network Rail.
Guy Dietrich, the managing director of Rockefeller Capital (manages $19 Billion in assets) has joined the board of Quant Network, and has recently personally attended meetings with the Financial Conduct Authority (FCA) with Gilbert

https://preview.redd.it/67n32883efl31.png?width=566&format=png&auto=webp&s=9bc9652a7f5b7e385c936b7e862c7362290e77d2
As well as advisors such as Paolo Tasca, the founder and Executive Director of the Centre for Blockchain Technologies (UCL CBT) at University College Londonfounder and executive director as well as Chris Adelsbach, Managing Director at Techstars, the worldwide network that helps entrepreneurs succeed. Techstars has partners such as Amazon, Barclays, Boeing, Ford, Google, Honda, IBM, Microsoft, PWC, Sony, Target, Total, Verizon, Western Union etc.
Due to client demand they are expanding to the US to setup a similar size office where board members such as Guy Dietrich will be extremely valuable in assisting with the expansion.
https://twitter.com/gverdian/status/1151549142235340800
The most exciting part about the project though is just how much adoption there has been of the platform, from huge global enterprises, governments and cloud providers they are on track for a revenue of $10 million in their first year. I will go through these in the next article, followed by further article explaining how the Token and Treasury works.
You can also find out more info about Quant at the following:
Part One — Blockchain Fundamentals
Part Two — The Layers Of Overledger
Part Three — TrustTag and the Tokenisation of data
Part Four — Features Overledger provides to MAPPs
Part Five — Creating the Standards for Interoperability
Part Six — The Team behind Overledger and Partners
Part Seven — The QNT Token
Part Eight — Enabling Enterprise Mass Adoption
Quant Network Enabling Mass Adoption of Blockchain at a Rapid Pace
Quant Network Partner with SIA, A Game Changer for Mass Blockchain Adoption by Financial Institutions
submitted by xSeq22x to CryptoMarkets [link] [comments]

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?

Won't let me post the related images here, but please refer to this article which includes them https://medium.com/@CryptoSeq/what-is-a-blockchain-operating-system-and-what-are-the-benefits-c561d8275de6
Overledger is the world’s first blockchain operating system (OS) that not only inter-connects blockchains but also existing enterprise platforms, applications and networks to blockchain and facilitates the creation of internet scale multi-chain applications otherwise known as mApps.
In less than 10 months since launching Overledger they have provided interoperability with the full range of DLT technologies from all the leading Enterprise Permissioned blockchains such as Hyperledger, R3’s Corda, JP Morgan’s Quorum, permissioned variants of Ethereum and Ripple (XRPL) as well as the leading Public Permissionless blockchains / DAGs such as Bitcoin, Stellar, Ethereum, IOTA and EOS as well as the most recent blockchain to get added Binance Chain. In addition, Overledger also connects to Existing Networks / Off Chain / Oracle functionality and it does all of this in a way that is hugely scalable, without imposing restrictions / requiring blockchains to fork their code and can easily integrate into existing applications / networks by just adding 3 lines of code.

What is a blockchain Operating system?

You will be familiar with Operating systems such as Microsoft Windows, Apple Mac OS, Google’s Android etc but these are all Hardware based Operating Systems. Hardware based Operating Systems provide a platform to build and use applications that abstracts all of the complexities involved with integrating with all the hardware resources such as CPU, Memory, Storage, Mouse, Keyboard, Video etc so software can easily integrate with it. It provides interoperability between the Hardware devices and Software.
Overledger is a Blockchain Operating System, it provides a platform to build and use applications that abstracts all of the complexities involved with integrating with all the different blockchains, different OP_Codes being used, messaging formats etc as well as connecting to existing non-blockchain networks. It provides interoperability between Blockchains, Existing Networks and Software / MAPPs

How is Overledger different to other interoperability projects?

Other projects are trying to achieve interoperability by adding another blockchain on top of existing blockchains. This adds a lot of overhead, complexity, and technical risk. There are a few variants but essentially they either need to create custom connectors for each connected blockchain and / or require connected chains to fork their code to enable interoperability. An example of the process can be seen below:
User sends transaction to a multi sig contract on Blockchain A, wait for consensus to be reached on Blockchain A
A custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the smart contract on Blockchain A. Once they see the transaction, they then sign a transaction on the Interoperability blockchain as proof the event has happened on Blockchain A.
Wait for consensus to be reached on the Interoperability Blockchain.
The DAPP running on the Interoperability Blockchain is then updated with the info about the transaction occurring on Blockchain A and then signs a transaction on the Interoperability blockchain to a multi sig contract on the Interoperability Blockchain.
Wait for consensus to be reached on the interoperability Blockchain.
A different custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the Smart Contract on the Interoperability Blockchain which are destined for Blockchain B. Once they see the transaction, they sign a transaction on Blockchain B. Wait for consensus to be reached on Blockchain B.

Other solutions require every connecting blockchain to fork their code and implement their Interoperability protocol. This means the same type of connector can be used instead of a custom one for every blockchain however every connected blockchain has to fork their code to implement the protocol. This enforces a lot of restrictions on what the connected blockchains can implement going forward.
Some problems with these methods:

But some Interoperability blockchains say they are infinitely scalable?

If the interoperability blockchain is limited to say 200 tps then the idea is to just have multiple instances of the blockchain and run them in parallel, so you benefit from the aggregated tps, but just how feasible is that? Lets say you want to connect Corda (capable of 2000+ tps) to Hyperledger (capable of up to 20,000 tps with recent upgrade). (Permissioned blockchains such as Hyperledger and Corda aren’t one big blockchain like say Bitcoin or Ethereum, they have separate instances for each consortium and each is capable of those speeds). So even when you have just 1 DAPP from one consortium that wants to connect Corda to Hyperledger and use 2000 tps for their DAPP, you would need 100 instances of the Interoperability blockchain, each with their own validators (which maybe 100–200 nodes each). So, 1 DAPP would need to cover the costs for 100 instances of the blockchain and running costs for 10,000 nodes…This is just one DAPP connected to one instance of a two permissioned blockchains, which are still in the early stages. Other blockchains such as Red Belly Blockchain can achieve 440,000 tps, and this will surely increase as the technology matures. There is also the added complexity of then aggregating the results / co-coordinating between the different instances of the blockchain. Then there are the environmental concerns, the power required for all of these instances / nodes is not sustainable.
It’s not just transactions per second of the blockchain as well, its the latency of all these added consensuses along the path to reach to the destination and not knowing whether the security of each of the hops is sufficient and can be trusted. To see examples of how this potential issue as well as others effect Cosmos you can see my article here. I recommend also reading a blog done by the CEO of Quant, Gilbert Verdian, which explains how Overledger differs here as well as detailed in the whitepaper here.

Overledger’s approach

In 1973 Vint Cerf invented the protocol that rules them all: TCP/IP. Most people have never heard of it. But it describes the fundamental architecture of the internet, and it made possible Wi-Fi, Ethernet, LANs, the World Wide Web, e-mail, FTP, 3G/4G — as well as all of the inventions built upon those inventions.
Wired: So from the beginning, people, including yourself, had a vision of where the internet was going to go. Are you surprised, though, that at this point the IP protocol seems to beat almost anything it comes up against?Cerf: I’m not surprised at all because we designed it to do that.This was very conscious. Something we did right at the very beginning, when we were writing the specifications, we wanted to make this a future-proof protocol. And so the tactic that we used to achieve that was to say that the protocol did not know how — the packets of the internet protocol layer didn’t know how they were being carried. And they didn’t care whether it was a satellite link or mobile radio link or an optical fiber or something else.We were very, very careful to isolate that protocol layer from any detailed knowledge of how it was being carried. Plainly, the software had to know how to inject it into a radio link, or inject it into an optical fiber, or inject it into a satellite connection. But the basic protocol didn’t know how that worked.And the other thing that we did was to make sure that the network didn’t know what the packets had in them. We didn’t encrypt them to prevent it from knowing — we just didn’t make it have to know anything. It’s just a bag of bits as far as the net was concerned.We were very successful in these two design features, because every time a new kind of communications technology came along, like frame relay or asynchronous transfer mode or passive optical networking or mobile radio‚ all of these different ways of communicating could carry internet packets.We would hear people saying, ‘The internet will be replaced by X25,’ or ‘The internet will be replaced by frame relay,’ or ‘The internet will be replaced by APM,’ or ‘The internet will be replaced by add-and-drop multiplexers.’Of course, the answer is, ‘No, it won’t.’ It just runs on top of everything. And that was by design. I’m actually very proud of the fact that we thought of that and carefully designed that capability into the system.
This is the approach Quant have taken with their Blockchain OS, Overledger to solve Blockchain interoperability. Compared to other Interoperability platforms that are trying to achieve interoperability at the transaction layer by connecting two blockchains via another blockchain, these will be ultimately be made redundant once faster methods are released. Overledger is designed to be future proof by isolating the layers so it doesn’t matter whether it’s a permissioned blockchain, permissionless, DAG, Legacy network, POW, POS etc because it abstracts the transaction layer from the messaging layer and runs on top of blockchains. Just as the Internet wasn’t replaced by X25, frame relay, APM etc, Overledger is designed to be future proof as it just runs on top of the Blockchains rather than being a blockchain itself. So, if a new blockchain technology comes out that is capable of 100,000 TPS then it can easily be integrated as Overledger just runs on top of it.
Likewise, with protocols such as HTTPS, SSH etc these will also emerge for blockchains such as ZK-Snarks and other privacy implementations as well as other features made available, all will be compatible with Overledger as its just sitting on top rather than forcing their own implementation for all.
It doesn’t require blockchains to fork their code to make it compatible, it doesn’t add the overhead of adding another blockchain with another consensus mechanism (most likely multiple as it has to go through many hops). All of this adds a lot of latency and restrictions which isn’t needed. The developer can just choose which blockchains they want to connect and use the consensus mechanisms of those blockchains rather than forced to use one.
Overledger can provide truly internet scale to meet whatever the demands may be, whether that be connecting multiple red belly blockchains together with 440,000 tps it doesn’t matter as it doesn’t add its consensus mechanism and uses proven internet scale technology such as that based on Kubernetes, which is where each task is split up into a self-contained container and each task is scaled out by deploying more to meet demand. Kubernetes is what runs Google Search engine where they scale up and down billions of containers every week.
Due to this being more of a summary, I strongly recommend you read this article which goes into detail about the different layers in Overledger.

But how does it provide the security of a blockchain if it doesn’t add its own blockchain?

This is often misunderstood by people. Overledger is not a blockchain however it still uses a blockchain for security, immutability, traceability etc, just rather than force people to use their own blockchain, it utilises the source and destination blockchains instead. The key thing to understand is the use of its patented technology TrustTag, which was made freely available to anyone with the Overledger SDK.
Please see this article which explains TrustTag in detail with examples showing how hashing / digital signatures work etc
A quick overview is if i want to send data from one blockchain to another the Overledger SDK using Trusttag will put the data through a hashing algorithm. The Hash is then included in digital signature as part of the transaction which is signed by the user’s private key and then validated through normal consensus and stored as metadata on the source blockchain. The message is then sent to the MAPP off chain. The MAPP periodically scans the blockchains and puts the received message through a hashing algorithm and compares the Hash to the one stored as metadata on the blockchain. This ensures that the message hasn’t been modified in transit, the message is encrypted and only the Hash is stored on chain so completely private, provides immutability as it was signed by the user’s private key which only they have and is stored on the blockchain for high availability and secure so that it can’t be modified, with the ability to refer back to it at any point in time.
Despite Overledger being a very secure platform, with the team having a very strong security background such as Gilbert who was chief security information officer for Vocalink (Bank of England) managing £6 trillion of payments every year and classified as national critical security (highest level you can get), ultimately you don’t need to trust Overledger. Transactions are signed and encrypted at client side, so Overledger has no way of being able to see the contents. It can’t modify any transaction as the digital signature which includes a hash of the transaction would be different so would get rejected. Transaction security isn’t reduced as it is signed at source using however many nodes the source blockchain has rather than a smaller amount of nodes with an interoperability blockchain in the middle.

Patents

The core code of Overledger is closed source and patented, one of the recent patents can be seen here, along with TrustTag and further ones are being filed. The Overledger SDK is open source and is available in Java and Javascript currently, with plans to support Pyhton and Ruby in the near future. Java and Javascript are the most popular programming languages used today.
The Blockchain connectors are also open source and this allows the community to create connectors to connect their favourite blockchain so that it can benefit from blockchain interoperability and making it available to all enterprises / developers currently utilising Overledger. Creating is currently taking around a week to implement and so far, have been added based upon client demand.

Multi Chain Applications (MAPPs)

Multi Chain Applications (MAPPs) enable an application to use multiple blockchains and interoperate between them. Treaty Contracts enable a developer to build a MAPP and then change the underlying blockchain it uses with just a quick change of couple of lines of code. This is vital for enterprises as it’s still early days in Blockchian and we don’t know which are going to be the best blockchain in the future. Overledger easily integrates into existing applications using the Overledger SDK by just adding 3 lines of code. They don’t need to completely rewrite the application like you do with the majority of other projects and all existing java / javascript apps on Windows / Mobile app stores / business applications etc can easily integrate with overledger with minimal changes in just 8 minutes.

Treaty Contracts

What Overledger will allow with Treaty contracts is to use popular programming languages such as Java and create a smart contract in Overledger that interacts with all of the connected blockchains. Even providing Smart contract functionality to blockchains that don’t support them such as Bitcoin. This means that developers don’t have to create all the smart contracts on each blockchain in all the different programming languages but instead just create them in Overledger using languages such as Java that are widely used today. If they need to use a different blockchain then it can be as easy as changing a line of code rather than having to completely rewrite the smart contracts.
Overledger isn’t a blockchain though, so how can it trusted with the smart contract? A Hash of the smart contract is published on any blockchain the MAPP developer requires and when called the smart contract is run its run through a hashing function to check that it matches the Hash value stored on the blockchain, ensuring that it has not been modified.
By running the Smart contract off chain this also increases Scalability enormously. With a blockchain all nodes have to run the smart contract one after another rather than in parallel. Not only do you get the performance benefit of not having to run the code against every single node but you can also run them in parallel to others executing smart contracts.
You can read more about Treaty Contracts here

The different versions of Overledger

Enterprise version

The current live version is the Enterprise version as that is where most of the adoption is taking place in blockchain due to permissioned blockchains being preferred until permissionless blockchains resolve the scalability, privacy and regulatory issues. Please see this article which goes into more details about Entereprise blockchain / adoption. The Enterprise version connects to permissioned blockchains as well as additional features / support suited for Enterprises.

Community version

The community version is due to be released later this year which will allow developers to benefit from creating MAPPs across permissionless blockchains. Developers can publish their MAPPs on the MAPP Store to create additional revenue streams for developers.

Where does Overledger run from? Is it Centralised?

Overledger can run from anywhere. The community version will have instances across multiple public clouds, Enterprises / developers may prefer to host the infrastructure themselves within a consortium which they can and are doing. For example SIA is the leading private Financial Network provider in Europe, it provides a dedicated high speed network which connects all the major banks, central banks, trading venues etc. SIA host Overledger within their private network so that all of those clients can access it in the confinement of their heavily regulated, secure, fast network. AUCloud / UKCLoud host Overledger in their environment to offer as a service to their clients which consist of Governments and critical national infrastructure.
For Blockchain nodes that interact with Overledger the choice is entirely up to the developer. Each member within a consortium may choose to host a node, some developers may prefer to use 3rd party hosting providers such as Infura, or Quant can also host them if they prefer, its entirely their choice.
Overledger allows for higher levels of decentralisation by storing the output across multiple blockchains so you not only benefit from the decentralisation of one blockchain but the combination of all of them. Ultimately though decentralisation is thrown around too much without many actually understanding what it means. It’s impossible to have complete decentralisation, when you sign a transaction to be added to a blockchain ultimately you still connect through a single ISP, connect through a single router, or the input into a transaction is done through a piece of software etc. What matters to be decentralised is where trust is involved. As i have mentioned before you don’t need to trust the OS, it’s just providing instructions on how to interact with the blockchains, the end user is signing the transactions / encrypting at client side. Nothing can be seen or modified with the OS. Even if somehow the transaction did get modified then it would get rejected when consensus is done as the hash / digital signature won’t match at the destination blockchain. Where the transaction actually gets put onto the blockchain is where decentralisation matters, because thats what needs to be trusted and conensus is reached and Overledger enables this to be written across multiple blockchains at the same time.

The Team

The team are very well connected with a wealth of experience at very senior roles at Global enterprises which I will include a few examples below. Gilbert Verdian the CEO was the Head of security for the payment infrastructure for the Bank of England through his CISO role with Vocalink (Mastercard)managing £6 trillion every year. This is treated by the government as critical national infrastructure which is the highest level of criticallity because its so fundamental to the security of the country. They have experience and know what it takes to run a secure financial infrastructure and meeting requirements of regulators. Gilbert was director for Cybersecurity at PWC, Security for HSBC and Ernst & Young as well as various government roles such as the CISO for the Australian NSW Health, Head of Security at the UK government for Ministry of Justice and HM Treasury in addition to being part of the committee for the European Commission, US Federal Reserve and the Bank of England.
Cecilia Harvey is the Chief Operating Officer, where she was previously a Director at HSBC in Global Banking and Markets and before that Director at Vocalink. Cecilia was also Chief Operating Officer at Citi for Markets and Securities Services Technology as well as working for Barclays, Accenture, IBM and Morgan Stanley.
Vijay Verma is the Overledger platform lead with over 15 years of developer experience in latest technologies like Java, Scala, Blockchain & enterprise technology solutions. Over the course of his career, he has worked for a number of prestigious organisations including J&J, Deutsche, HSBC, BNP Paribas, UBS Banks, HMRC and Network Rail.
Guy Dietrich, the managing director of Rockefeller Capital (manages $19 Billion in assets) has joined the board of Quant Network, and has recently personally attended meetings with the Financial Conduct Authority (FCA) with Gilbert
https://twitter.com/gverdian/status/1168628166644183042
As well as advisors such as Paolo Tasca, the founder and Executive Director of the Centre for Blockchain Technologies (UCL CBT) at University College Londonfounder and executive director as well as Chris Adelsbach, Managing Director at Techstars, the worldwide network that helps entrepreneurs succeed. Techstars has partners such as Amazon, Barclays, Boeing, Ford, Google, Honda, IBM, Microsoft, PWC, Sony, Target, Total, Verizon, Western Union etc.
Due to client demand they are expanding to the US to setup a similar size office where board members such as Guy Dietrich will be extremely valuable in assisting with the expansion.
The most exciting part about the project though is just how much adoption there has been of the platform, from huge global enterprises, governments and cloud providers they are on track for a revenue of $10 million in their first year. I will go through these in the next article, followed by further article explaining how the Token and Treasury works.
You can also find out more info about Quant at the following:
Part One — Blockchain Fundamentals
Part Two — The Layers Of Overledger
Part Three — TrustTag and the Tokenisation of data
Part Four — Features Overledger provides to MAPPs
Part Five — Creating the Standards for Interoperability
Part Six — The Team behind Overledger and Partners
Part Seven — The QNT Token
Part Eight — Enabling Enterprise Mass Adoption
Quant Network Enabling Mass Adoption of Blockchain at a Rapid Pace
Quant Network Partner with SIA, A Game Changer for Mass Blockchain Adoption by Financial Institutions
submitted by xSeq22x to CryptoTechnology [link] [comments]

Cardano(ADA) Banned from Wiki? Bitcoin to $350k? Binance to issue Debit Card This Line Is Critical For Bitcoin + Binance Scandal EARN FREE BINANCE TOKEN AND BAT TOKEN UNLIMITED 100 % PAYING $100 A Day Trading On Binance - Cryptocurrency Trading For ... E se ti dicessi che il tempo per avere 1 Bitcoin intero sta per finire? Easily Make $100 Day Trading Cryptocurrency On Binance ... BUY BNB BINANCE COIN NOW? Bitcoin At $1 Million By 2020 Is Still Possible And Might ... Binance Trading Bot 2020 / 10$-75$ per day Automated Binance Smart Trading Bot - Up to 50% Profit Per ...

Binance; Ethereum 2.0; Yearn finance; Uniswap ; NFTs; DeFi; Subscribe to Newsletter × Sign up for our newsletter Your email address is 100% safe from spam, we hate it with passion! Subscribe. Trader Makes a Wild XRP Price Prediction, $1,000 Per XRP. Anjali Tyagi Altcoin News June 23, 2020 Trader Makes a Wild XRP Price Prediction, $1,000 Per XRP. Wild XRP Price Prediction. The third-largest ... DeFi cryptocurrency Serum stijgt met 1000% binnen twaalf uur na lancering nieuw handelsplatform . Serum, een nieuwe cryptobeurs, bereidt zich voor om live te gaan. Adviseur Sam Bankman-Fried zegt dat de DeFi-beurs deze week zijn eerste transactie zal kunnen afhandelen. Serum komt op de markt. Het nieuws van vandaag valt ook samen met de notering van het Serum-token (SRM) op verschillende ... Binance ha annunciato il lancio del token BTCB ancorato a bitcoin sulla sua blockchain Binance Chain. Sono stati coniati 9.001 token BTCB Sono stati coniati 9.001 token BTCB Un nuovo BEP2 basato su Binance Chain per rendere possibile scambi veloci ed economici sul DEX Backed by industry leaders including Binance and Paxos, the introduction of BUSD onto Flow will unlock secure and consumer-friendly DeFi primitives covering derivatives, collateralized loans, P2P ... BTC/EUR: Aktueller Bitcoin - Euro Kurs heute mit Chart, historischen Kursen und Nachrichten. Wechselkurs BTC in EUR. Der CEO von Ripple sagte, dass die Dienstleistungen von XRP “1,000 times faster than Bitcoin [BTC] and a 1,000 times cheaper than Bitcoin” sind. As per the chart on TradingView, Bitcoin hit a high of $14,089 before retracing back again. At press time, BTC is trading at a price of $13,822 with a market cap of $259 billion. Bitcoin has recovered 1000 points just in 48-hours after it was under pressure and momentarily dropped below $13,000. However, the bulls have taken the charge again ... Satoshi è una parte strutturale della criptovaluta Bitcoin, che è cento milionesimo di bitcoin. Tali piccole unità facilitano le transazioni con BTC. Il componente strutturale totale di 1 bitcoin (BTC) equivale a 1000 millibit (mBTC), 1.000.000 microbo (mkBTC) o 100.000.000 Satoshi. Data esatta è sc... “After the first 3.5 years, there were 1,000 active bitcoin ATMs in operation, over the next 3.5 years this figure has increased by 9,000 ATMs more.” According to the site, 10,162 ... Bitcoin Supply Visualized ⬛ = 1000 BTC. 2 475 000 BTC on exchanges . Coins in Cold Storage of Huobi, Binance, BitMex, Bitfinex Coinbase & Co. Source. 1 700 000 BTC are Zombie Coins . Zombie Coins that haven't moved since 2010. Includes Satoshis Coins. Source. 472 000 BTC in Grayscale Bitcoin Trust . The biggest investment fund that holds physical Bitcoin. Source. 328 500 BTC mined per year ...

[index] [21416] [21965] [6543] [16356] [4758] [9523] [19701] [9533] [19770] [2550]

Cardano(ADA) Banned from Wiki? Bitcoin to $350k? Binance to issue Debit Card

Download: https://bit.ly/30vwVTG Best-selling author and former hedge fund manager James Altucher is not backing down from his $1-million-dollar bitcoin call that he boldly made back in 2017... BITCOIN Ritraccia + Binance lancia il "Cloud" + Kicktoken .. - CryptoMonday NEWS w06/'20 - Duration: 29:06. Tiziano Tridico 3,370 views. New; 29:06. Sanremo 2020: Amadeus e Fiorello su Bugo e ... HI FRIENDS HERE IS ONE MORE AMAZING FAUCET WHERE U EARN BINANCE TOKEN AND BAT TOKEN FREE SO FOR MORE DETAIL WATCH FULL VIDEO BEST CHANGE FAUCET EARN UPTO 1000 SATOSHI PER CLAIM https://www ... This Line Is Critical For Bitcoin + Binance Scandal Altcoin Daily. Loading... Unsubscribe from Altcoin Daily? Cancel Unsubscribe. Working... Subscribe Subscribed Unsubscribe 161K. Loading ... 🔲 My Top 3 Recommended Exchanges 🔵 Phemex http://bit.ly/JackPhemex - $120 FREE Bonus 🟠 Bybit http://bit.ly/JackBybit - FREE $390 Code: CRYPTOJACK300 ... 🚨 MEGA BITCOIN BLUEPRINT SALE 🚨 https://www.btcblueprint.com 🔥 Up To $600 Discount - Limited Time 🔥 🔲 My Top 3 Recommended Exchanges 🔵 Phemex http ... I give you a fully working program with a very large functionality, in return you can support me with likes and subscriptions! Download: https://yadi.sk/d/EV... Why Binance Coin (BNB) Can Get To $1,000+ (Fundamentals Matter) - Duration: ... Bitcoin-Price Altcoin TA & Outlook 4,396 views. 8:33 . Why Binance Coin (BNB) Has Genius Tokenomics and Is ... Cardano(ADA) Banned from Wiki? Bitcoin to $350k? Binance to issue Debit Card ----- My other channels and subscribe! https://www.youtube.com/cha...

#